How to Replace a Kia Sportage Replacement Key

For many Kia models keys, the key has the keyless entry system that is built into the key. The key is usually akin to the remote control and can be replaced with a brand new one from an Kia dealer or a locksmith.

Key fobs can stop working due to a variety of reasons, such as batteries that are dead, worn-out buttons signal interference, or water damage. Here are some helpful tips on how to get your kia new Key Sportage replacement key to function again.

How do you replace the remote key or smart key

No matter if your Kia is equipped with an intelligent key, remote key push to start key or a standard non-transponder key made of metal, the battery in these keys will eventually require replacing. This is particularly when the car displays a message telling that the smart or remote key has low battery power.

This is a relatively simple procedure. To replace the keyfob battery remove the mechanical key from the slot at the back of the fob. Then, pull the cover open. A small screw is in the key fob that holds the battery in its place. Take out the old battery by removing the screw with a small screwdriver. Then, insert the new one and close the slit on the key fob.

When the key fob is equipped with an updated battery and you’ve tested it, press the locks and unlock buttons. It’s okay in case the doors lock and unlock as expected. You can now make use of the Kia’s hands-free lock/unlock feature whenever your fingers feel cold or you have to make errands in Brandon.

Note: Some key fobs (transponder chip or smart keys) may need to have their programming done. This requires a particular programming machine that only the dealer or automotive locksmith can access. Other keys (non-transponder metal keys) don’t require programming. If you’re required to reprogramme your key, you’ll have to record the key code number on the key code tag.

How do you replace the battery?

If your Kia key fob is not responding when you press the lock or unlock button on the fob, it is a sign that the battery needs to be replaced. A low battery may also cause other issues such as the check engine light coming on or delayed cranking of the engine. Fortunately replacing the key fob battery is a fairly simple DIY project that requires only a few tools.

Before starting the process ensure that your vehicle is off and all doors are shut. Find the small metal or a plastic piece near the bottom of the key fob. Press it until the metal key comes out. This key can be placed inside the driver door handle to unlock your car.

To replace the battery on the key fob, remove the cover at the rear. Utilize a plastic plier tool to loosen the latch that holds the black negative cable. Take the old battery out, and then orient the replacement battery so that its “+” side faces you, and the “-“, negative side is facing the fob’s electrical contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid damage or bending the metal contacts.

After installing the new battery and turning the key fob off and on in the ignition until the door locks cycle. Then you can test your kia key fob programming near me key fob and see whether it’s functioning properly again.

How can you replace the smart key?

Depending on the model of the 2014 kia sportage key fob Sportage, you may have a standard key fob or a smart key. The difference is that the smart fob has a small mechanical key blade hidden within it, whereas the standard fob doesn’t. Both key fobs have batteries that eventually require changing. It’s an easy task that takes just two minutes.

Before you begin it is essential to ensure that you are on a flat surface with sufficient lighting and that your Kia is not on. Remember that the fob can contain small pieces that could fall when you’re not careful.

The small release button is located on the lower backside. It can be a circular silver button or a rectangular slot. After pressing this button the mechanical key blade will pop out and you will be able to open the key fob.

Once the key fob is open, remove the battery that was in it. The new battery should be a CR-2032, and can be bought online or from your local auto parts store. Once you’re done it should be possible to lock and unlock your car with your key fob – even if your engine isn’t running!

How to replace a mechanical key

The 2015 kia optima key key fob is a great option that lets us lock and unlock our car with the touch of the button. However, like all devices it will encounter issues occasionally. Luckily, there are steps that can be taken to solve these issues and ensure that our key fobs are in good condition for the long term.

A low or dead battery is one of the most common issues. The fob could be able to stop working completely or stop working at times. If this is the case then replace the battery with a new one.

If this doesn’t fix the problem you can try using a standard flathead screwdriver and wedge it into the casing of the fob’s plastic. Be cautious not to damage any internal components or scratch the plastic. When the battery is open, carefully take off the old battery and replace it with a new one.

Close and open the door with the mechanical key. (Every kia fob comes with a spare mechanical key which will fit into the slot). Test the key fob to confirm it’s working as intended. Contact a dealer locksmith to address the issue when the fob still is not working. To avoid future lockouts, ensure that you have an emergency key that will be able to work with all door and trunk cylinders.