UPVC Replacement Door Handles

Over time, the handles on your doors will wear down and require replacement. It is important to match the dimensions of the handles you have previously replaced when replacing upvc window handles them.

The top screw’s position the lever, and the keyhole sizes are the three measurements that you need to check. Use the size guide to aid you.

Inline Lever/Lever

A lever door handle is a contemporary handle that can be installed on new or replacement doors. This kind of handle is available in many designs and finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are ideal for multi point lock doors which require a robust design. The handles are inline and operate with the same spindle as well as screw fixings so they are easily installed on new or existing uPVC/Composite doors.

The aluminium window handle can be adjusted and angled to accommodate the needs of all users. The handle has been tested to 200 000 cycles. This ensures that the finish is of high quality and performance is maintained over time. The sprung lever is also adjustable to fit a broad range of locks. This is particularly useful in doors that are narrower, where the cylinder is situated further back in the door. A shortened lever can also be used on doors that have a latch which can be operated with the thumb located on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently to the lever type handles that are found on the majority of doors. The handle can operate from a single spindle (inline) or independently from each side using two offset or inline spindles (pad). They are generally used on UPVC double glazed doors. They come in many variations & finishes.

The handles are available in a variety of finishes, including White Chrome and Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This provides the handle with the best performance and durability to serve its intended use.

All UPVC lever pads for handles come with a spindle, screws and can be installed on the uPVC door. The backplate fixing centers of 211mm allow for a wider size of window handle replacement which is often a benefit when replacing a damaged or worn multi point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of door handles sagging from their horizontal position when they are not in use.

When choosing the replacement UPVC handle and spindle it is essential to match the dimensions of the PZ of the multipoint lock as well as the uPVC door. This measurement is often referred to as the ‘handle centre’ or ‘cylinder centres’ and is a critical aspect to match the correct handles.

Once you have the proper PZ size you will then have to ensure that the handle lever pads and push pads are of a suitable shape to fit the American with Disabilities Act (ADA) approved handles you require for your doors. These are typically square or round with an internal lever, and an external push pad.

The majority of UPVC Lever Pads we offer are sprung. This means they return to a horizontal position when not in use instead of hanging, and possibly securing to the frame. This stops draughts and cold air from getting into a house. The majority of UPVC lever pad style handles are available in left and right handed versions which allows them to be placed on either side of doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other types of doors. They work with a key to unlock a cylinder case that is then revealed with pins that can be aligned with those in the lock body, allow them to rotate a revolving cam, thus opening the door. Euro Cylinders can be fitted with up to six pins with both internal and external doors typically needing different levels of security.

Selecting the right cylinder for your needs is vitally important; this is contingent on the way your doors and handle are utilized. External doors, for instance are required to be fitted with higher security cylinders and doors inside can be secured with a standard cylinder. Certain cylinders are equipped with additional features that can improve security, like anti-drill or anti-bump properties.

To make sure that the euro cylinder is of the right size for your door, it must be measured accurately. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder and the thumb turn if you have one. If you cannot measure with the lock in position, you can take it out of it. A cylinder that protrudes beyond the handle and escutcheon could be vulnerable to attacks such as lock snapping, so it is important to make sure it’s not too long.

The majority of modern cylinders have been designed with anti-drill and bump resistance features built into their design. These are designed to reduce attack chances by forcing the cylinders to turn in a new direction. This can help stop the attack and keep your doors safe.

There are cylinders that are designed to withstand snapping. This is a growing method of attack on cylinders, which is where the break line of the lock is attacked using a special tool to break off the front of the cylinder and allow the door to open. This is a quicker and more convenient method of gaining access than using a multipoint window locking handles system. It also leaves less evidence of the burglary which could make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is positioned within the base of the door handle backplate, providing a spring solution that returns your multipoint lock handles to their original position after using. There was a time when handles did not have a spring integrated into them, and as a result, they can droop or drop once the locking mechanism is removed. This simple component is the best solution to fix this problem. It also stops your upvc door from becoming stuck in the closed or open position as they aren’t easy to close manually.

These spring cassettes have been specifically designed for use with sprung multipoint locks They will not work with non-sprung multipoint handles. You will require a bespoke hole cut into your backplate in order for them to fit (please check the image for a technical diagram). These cassettes can be used as a replacement for damaged or missing cassettes that are in the backplate of uPVC door handles. They have an elongated square that accommodates an 8mm spindle and are available in a variety of.

These spring cassettes offer an excellent value solution for the issue of sagging door handles. They are simple to install and will increase the lifespan of your uPVC doors. For more information about our wide range of uPVC spares and accessories contact us today. in contact with our team. We are here to assist and offer expert advice.