How to Replace a Kia Sportage Replacement Key

For a number of kia optima locked keys in car models the key comes with the keyless entry system that is built into the key. This key is similar to remote controls, and is exchangeable by an 2013 kia optima key Replacement dealer.

Key fobs might stop working due to a number of reasons, such as the battery being dead, worn-out buttons, signal interference or water damage. Here are some tips to assist you in getting your Kia sportage replacement key to work again.

How to replace a smartkey or remote key?

Whether your kia ceed key fob programming comes with an intelligent key, remote key, push to start key or regular metal non-transponder key The battery inside these keys will eventually need replacing. This is especially when your car displays a message telling you that the smart or remote keys aren’t powered.

Luckily, it’s an easy process. To replace the battery of the key fob, remove the mechanical key from the slit at the back of the key fob. Next, pry open the cover. Inside the key fob will be an incredibly small screw that holds the battery in its place. By using a small screwdriver unscrew the screw and pull out the battery that was in place. Insert the new battery and close the opening on the key fob.

Test the key fob by pressing the lock/unlock buttons. It’s okay if the doors lock and unlock as expected. You can now utilize the hands-free feature to lock and unlock your kia sorento keys locked in car whenever your fingers feel cold or you need to complete errands in Brandon.

Note: Some key fobs (transponder chip or smart locked keys in kia optima) might require their programming done. This requires a specific programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) do not require programming. If your key requires to be reprogrammed, you will need to be aware of the key code number written on the tag that identifies the key and save it in a safe location.

How to replace a battery

If the Kia key fob is unable to respond when you press the lock/unlock button, it’s a sign that the battery is not fully charged. A weak battery can cause other problems like the check engine light flashing on or delayed engine cranking. It is quite simple to replace the key fob batteries with only some tools.

Make sure to shut off your vehicle and close all doors before you begin. Find the small, metal or plastic piece near the bottom of the key fob. Press it until the key falls out. Then, you can insert this key into the handle on the door of your driver to unlock your car.

To replace the battery inside the key fob, remove the cover that covers the rear. Use a plastic pry tool to loosen the latch that holds the black negative cable. Remove the old battery and align the new one in a way that the “+” positive side is facing you, and the “negative” negative side is facing the fob’s electrical contacts made of metal. Avoid using excessive force when pushing the new CR2032 into place to avoid damage or bending the metal contacts.

Once the new battery has been installed then turn the key fob off and on in the ignition several times until the door locks cycle. Then, test your Kia key fob to check if it is working properly again.

How to replace the smart key

Depending on the model of the kia smart key replacement cost Sportage, you may have the standard key fob, or a smart key. The smart key features an embedded mechanical key blade, however, the standard key fob does not. Both key fobs are equipped with batteries that will eventually require replacement. This is an easy process that takes only two minutes.

Make sure you turn off your Kia and sit on a flat well-lit and well-lit area before you begin. Be aware that there are tiny parts inside the fob that can fall out if you are not cautious.

The release button for the small size is located on the lower backside. This will either be a circular silver button or a rectangular slot. After pressing this button mechanical key blade, it will come out and you will be able to open the key fob.

Once you have the key fob open then you can remove the old battery and replace it. The new battery should be a CR-2032 and can be bought online or from your local auto parts store. After you’re done, your key fob should allow you to lock the vehicle, unlock it, and then start your vehicle, even if it isn’t running.

How to replace a mechanical key

The Kia key fob is a wonderful option that lets us lock and unlock our car with the click of one button. Like any other device that is used, the Kia key fob can occasionally have problems. Luckily, there are ways to troubleshoot these issues and keep our key fobs in good working condition for the long run.

One of the most frequently encountered problems is a dead or dead battery. This can cause the device to cease working or stop working at times. If this is what you are experiencing it is time to replace the battery a new one.

If this isn’t enough to resolve the problem you can try using a standard flat-head screwdriver to break open the casing of the fob’s plastic. Be careful not to harm any internal components or scratch the plastic. Once the battery is removed then replace it with a brand new one.

Close and open the door with the mechanical key. (Every kia fob comes with a spare mechanical key which will fit into the slot). Test the fob to make sure it’s functioning correctly. If the device isn’t working, call an expert locksmith or dealer to solve the issue. To avoid lockouts in the future, make sure you get an emergency key that will work on all trunk and door cylinders.