Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. This system is discreet & does not require additional key fobs to operate.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence of up to 20 presses. This then authorizes the vehicle to start.

Simple PIN code change process

Many owners are upgrading their security because of the increase in vehicle theft. There are many kinds of security products that are available for sale including tracking systems, alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking system can assist in finding your vehicle in the event of theft, it does not prevent the crime from happening in the first in the first place. Immobilisers, in contrast perform exactly as they claim on the label – they shut off your car’s engine to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be done using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is a great solution for those who want to offer your car to valet parking or maintenance. The immobiliser will remain active.

The ghost immobiliser fitter is a very unique and ingenious device that is used in conjunction with the buttons on your vehicle instead of being a separate unit. It is not only an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also prevents ECU swapping. It’s a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It can’t be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create a unique sequences for disarming. The sequence can be extended 20 presses for additional security. The iPhone app only allows one connection, and comes with an individual pairing code for the ghost installation near me. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It can be temporarily operated in valet or service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, you can give your car to a valet or service without entering the code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a specific code. The system can be activated or deactivated through your smartphone’s app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. However, if a transponder from a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It guards you against hacking or key cloning, and even key theft. Only by physically towing your car away can thieves take it away and not be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, as well as the door panels, to generate a unique PIN code that needs to be entered in order to use your vehicle. This is done without additional hardware, like keys fobs. It can take up to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing technologies to detect that the system has been set up.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost alarm installation near me is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves and is also harder to remove from a car alarm which requires disarming with a button sequence. This makes it an excellent complement to an GPS tracking device, which can be used to locate your vehicle after it’s been stolen.

Override of emergency PIN code

You don’t have to look far on social media to find stories or videos about cars that have been stolen using the latest technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

The ghost installations reviews immobiliser was designed to stop this and offer an extra layer of security to protect your vehicle from being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel, and the centre console. This unique PIN is entered alongside your original key fob to prevent the engine from getting started. The unique override pin is located on a black card which you will receive following the installation. It is simple to remember since there aren’t any LED indicators.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can’t be detected using diagnostic software that can determine the security system you have installed. This makes it an excellent alternative to the tracker.

In contrast to other security systems that use a relay inside the engine bay, CANBUS Immobilisers communicate with the car’s ECU and BCM via CAN data bus (brand dependent). This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also compatible with valet/service modes and is a great alternative to a tracking device if you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen without the owners keys. It’s easier than ever before to take your joy and pride thanks to the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It communicates directly to your vehicle’s ECU (Engine Control Unit) via the CAN data circuit. It’s completely silent as it doesn’t use radio frequencies or keys fobs. It isn’t detected by diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system as only the correct PIN code will allow the engine to start.

The device is hidden within your car and can be accessed by existing buttons on your steering wheel, the centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits must be entered prior to being able to start your vehicle.

This is the first aftermarket CAN-bus immobiliser for the market that is being designed. It can prevent your vehicle from being started or driven if you don’t enter a PIN number first. If you are driving away with the device in motion, an indicator will appear on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate as normal. If you do not enter your PIN code at this point, the warning will continue to flash and will require another PIN code for every attempt to start your car.