How to Replace a Kia Sportage Replacement Key

For a variety of Kia models keys, there is a built-in keyless entry system. This key typically resembles the remote control and can be exchanged with a brand new one from an Kia dealer or locksmith.

Key fobs can stop working for several reasons, including the battery of the coin is dead worn buttons signals, water damage, signal interference and a damaged receiver module. Here are some guidelines on how you can get your 2013 kia soul key fob programming picanto Keyless entry (Bafkor.com) Sportage replacement key working again.

How do you replace a remote key or a smartkey?

No matter if your Kia is equipped with an intelligent key, remote key push to start key, or a regular non-transponder steel key the battery in these keys will eventually require replacing. This is especially relevant if your vehicle displays a message indicating that the smart or remote keys have low battery power.

It’s a fairly simple process. In order to replace the key fob battery take out the mechanical key from the slit on the back of the key fob and break the cover. Inside the key fob there will be the small screw that holds the battery in place. Utilizing a small screwdriver remove the screw and remove the old battery. Install the new battery and close the opening on the key fob.

When the key fob is equipped with new batteries check it by pressing the locks and unlock buttons. If the doors lock and unlock exactly as you expect, then you’re in good shape! You can now use the hands-free feature to lock and unlock your Kia whenever your fingers become cold or you need to do some errands in Brandon.

Note: Some keys may require to be programmed (transponder chips or smart keys). This requires a programming machine, which is only available to the automotive locksmith or dealer. Other keys (non-transponder metal keys) do not require programming. If your key has to be reprogrammed, you must be aware of the key fob kia sorento code number that is stamped on the key code tag and save it in a safe place.

How do I replace the battery?

If the Kia key fob doesn’t respond to pressing the lock/unlock button, it’s a sign that the battery is not fully charged. A battery that is not functioning properly can cause other issues, like the check engine light flashing or the engine not running correctly. It is quite simple to replace the key fob batteries with only two tools.

Be sure to turn off your vehicle and shut the doors before you begin. Find the small, metal or plastic piece at the bottom of the key fob. Jiggle it until the metal key falls out. This key can be inserted into the driver door handle to unlock your car.

To replace the key fob replacement kia fob battery, take off the cover on the rear and use a plastic pry bar tool to remove the latch that holds the black negative battery cable. Remove the old battery and then orient the replacement battery to ensure that its “+” side is facing you and the “-“, negative side is facing the fob’s electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.

After you have installed the new battery after which you turn the key fob on and off in the ignition until the door locks up. You can then test your kia optima locked keys in car key fob and see whether it’s functioning properly again.

How can you replace the smart key

Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The smart key features an embedded mechanical key blade, while the standard keyfob does not. Both key fobs contain an internal battery that will eventually require changing. Fortunately, it’s a fairly simple process that takes just two minutes.

Before you get started before you begin, ensure that you are on a level surface with good lighting and that your Kia is off. Be aware that the fob contains tiny pieces that could be thrown off if you’re not careful.

The small release button is located on the lower backside. It’s either an oval or circular slot. Once you press this, the mechanical key blade will come out and you can then open the key fob.

Once you have the key fob open then you can take off the old battery and replace it. The new battery should be a CR-2032 and can be purchased online or at a local auto parts store. After installation it should be possible to lock and unlock your vehicle with your key fob, even if the engine isn’t running!

How to replace a mechanical key

The Kia key fob is a great convenience that lets us lock and unlock our vehicle with the click of one button. But, as with all devices it will encounter issues occasionally. There are ways to solve these issues and keep your key fobs running for many years.

A low or dead battery is among the most frequently encountered issues. The battery could cause the device to stop working or work intermittently. If this is the case then try replacing the battery with a fresh new one.

If this isn’t enough to solve the problem, use a flathead screwdriver standard to wedge the plastic casing of the fob open. Be sure not to damage any internal components or scratch the plastic. After the battery has been removed, replace it with a new one.

After the new battery has been put in, close and open the doors with the mechanical key (every Kia fob has an emergency mechanical key that can fit in the slot). Test the key fob to confirm it’s working as intended. If the fob still isn’t working, call an expert locksmith or dealer to help resolve the problem. To avoid locking outs in the future, make sure you get an emergency key that can be able to work with all door and trunk cylinders.