How to Replace the Replacement Key Battery For the Saab 9-3

saab 93 key fob owners have a unique set of steps to take to add another key. It requires dealer support using a handheld computer called Tech-2. A new key and transponder are required to be purchased and then programmed to the car.

Make sure to rotate your keys in order to prevent one from wearing out faster than another. This will help to keep your keys in perfect condition.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs have electronics inside that make it difficult to duplicate. This has made stealing cars a lot more difficult than it was just a few years ago. However, it also has made the replacement of lost keys a much more expensive endeavor.

Every owner of a Saab 9-3 needs to have at least two working keys. It’s expensive to replace a lost saab keys key, as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 to do this.

There are ways to cut down on the high cost. Some parts suppliers will look up the code from an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade at a fraction of the dealer’s cost. The key, however, must be the same as the original one to function properly in your car.

You can also replace the case yourself by following these steps. You will need to have an open-faced screwdriver and a lot of patience. With the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. After the case is open remove all electronics and put them in the new case. Make sure to insert the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a budget part that can be quickly and easily replaced. This video tutorial on DIY from YouTube Cyclone Cyd will show you how to replace the battery of the remote key fob in only four steps. This tutorial should work for any modern saab replacement key key fob, although the process might differ slightly.

The first step is to locate the button that releases the backup key within the fob. This button is usually located on the back of your fob, right next to the Saab Logo. Then, use a flathead screwdriver to insert into the small hole in this button. This will be enough to allow you to open the fob’s case so that you can replace the battery.

After the new battery CR1632 is installed You can then reassemble the remote key fob and program it to your car. The procedure should take no more than an hour or less. This is a straightforward process that doesn’t require any special tools.

If you lose your key, the procedure will be somewhat more complex, but it can still be done. The dealer will need to determine the VIN of the car and then request a replacement key blade and TWICE module, both with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.

Key Replacement Fob

The key fob is the part that locks and unlocks your car, it’s got a battery within. The batteries last for a certain time and will eventually fail. This is a common problem that happens to all cars and the good news is that you can change the batteries in a majority of key fobs without replacing the entire case. You can buy replacement fobs on Amazon that include all the electronics already in place, so you’ll simply open the case and replace the batteries that were in the case. It is important to keep in mind that you’ll have to remove the emergency key first, and you can do this by inserting the small screwdriver flathead into the slot located in the middle of the case. The screwdriver should be moved around the case until it is split open, making it easier to take it out.

When you are ready to replace the keys make sure you have a spare since this will cut down the total cost by a substantial amount. If you have an additional key, request the dealer to cut it and program it for your vehicle. This is a lot less expensive than purchasing a brand new key fob.

If you don’t have a spare, it is possible to add another key to your car, but this requires a lot of research and effort. Adding a second key costs a few hundred dollars, and it requires programming of the car’s computer. Professionals can accomplish this, but it’s an expensive option.

Replacement Ignition

The current SAAB 9-3 uses an alarm system that is more sophisticated built around a key code. This means that in the event that you lose your only working key, adding an additional one could be extremely costly since the car needs to have a computer module installed, and it also must be specially programmed to accept an additional key. Most locksmiths cannot do this and dealers will charge hundred dollars to program the new key!

Dealers will charge you top dollar to replace your car computer (also known as the CIM or SAAB twice) when you lose your only functioning key. We can reprogram the EEPROM on your car’s computer so that it is ready to accept an additional key. This will save you more than 50% of the cost you would pay at an auto dealer.

If you’ve been a long-time owner of an 03-11 SAAB 9-3, then you probably realize that the ignition key isn’t very robust. They can become extremely sticky and the buttons are known to be removed from them from time to time which is why you should think about getting a replacement if yours isn’t functioning properly. The good news is that replacing the ignition key isn’t as complicated as it sounds, and it can be done quickly with the proper tools.