UPVC Replacement Door Handles

The handles on your doors are worn out with time and require to be replaced. It is crucial to match the dimensions of the handles that were previously used when replacing them.

The top screw’s position as well as the lever and keyhole size are the three measurements you have to check. Use the size guide to assistance with this.

Inline Lever/Lever

A lever door handle is a contemporary handle that can be put in on new or replacement doors. This style door handle is offered in a variety of styles and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are ideal for multi point lock doors that require a heavy duty design. The handles are inline and operate with the same spindle as well as screw fixings. They can be easily incorporated into new or existing uPVC/Composite doors.

The handle can be placed and angled to fit any user. The handle has been tested to 200,000 cycles, this allows for the assurance of the quality of the finish and performance of the handle over time. The sprung lever is also adjustable to fit a broad range of locks. This is especially useful for doors with narrower frames, where the cylinder is further back. A shortened lever is also an excellent option for doors where the latch can be activated by the thumb turn on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently from lever-type handles for double glazed doors found on most doors. These handles are operated by one spindle or two spindles inline or offset. They are usually utilized on UPVC doors with double glazing. They come in a variety of finishes & variations.

The handles have been tested to at least 200 000 cycles and are available in several finishes, including White Silver, Chrome, & Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle the best performance and durability for its intended use.

All of the upvc door handles replacement handle lever pad styles come with a spindle and screws which allow them to be fitted on an existing or new uPVC door. The backplate fixing centres of 211mm allow for a wider handle, which can be beneficial when replacing a damaged or worn multi-point door lock mechanism. The handle levers are spring-loaded, which solves the issue of handles hanging from their horizontal position when they are not in use.

It is important to match the PZ dimensions of both the multipoint lock as well as the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement is often known as the ‘handle centre’ or ‘cylinder centres’ and is a critical aspect in ensuring that you have the appropriate handles.

Once you have the proper PZ size, you’ll have to ensure that the handle lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) approved handles you require for your doors. They are typically round or square, with an internal lever, and an external push pad.

The majority of UPVC lever pads that we offer are sprung, which means that they will return to their horizontal position when not in use, instead of hanging out and possibly sticking in the frame. This prevents draughts from entering the building. The majority of UPVC lever pad style handles are available in left and right handed models which allows them to be put on either side of doors.

Euro Cylinder

Cylinder locks are typically used on uPVC doors, but can be utilized on other types of door. They work by using a key to unlock a cylinder case that will reveal pins that can be aligned with the pins in the lock body and allowing them to turn a revolving cam, thus opening the door. Euro Cylinders can be fitted with up to six pins, with both internal and external doors usually requiring different levels of security.

The choice of cylinder is vital. It depends on the use that your doors and handles receive. Doors that are external, for instance should be equipped with cylinders with greater security and internal doors can be secured with an ordinary cylinder. In addition, some cylinders have extra features which can enhance security even more, like anti-drill and anti-bump characteristics.

A euro cylinder should be measured correctly to ensure it’s the correct size for your door. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn if there is one. It is best to do this while the lock is in place, but in the event that this is not possible, you may take it off to measure. It is important to avoid having a extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.

The majority of modern cylinders have been made with bump and anti-drill features built into their design. They are designed to decrease the chance of attack by forcing cylinders to turn in a new direction. This can to deflect an attack and protect your door.

Certain cylinders are constructed to withstand snapping. This is a more frequent type of attack on cylinders, which is where the break line of the lock is attacked using a special tool to snap off the front of the cylinder to allow the door to open. This is a faster and easier way to gain access than through the use of a multipoint Locking Window Handles system. It also leaves less evidence of the burglary which can delay insurance claims.

Spring Cassette

This spring cassette sits in the base of the door handle backplate providing a sprung solution and returning the multipoint lock handles back to their rest position after usage. These handles used to have no spring and would drop when the locking mechanism was disengaged. This component is the most effective way to address this issue. It also helps prevent your door from getting stuck in the closed or open position, as they are difficult to close manually.

These spring cassettes are specially made for use with sprung multipoint locks, they will not fit non-sprung multipoint handles. You will need to have a bespoke hole cut into your backplate to allow these to fit (please look at the image for a technical diagram). These cassettes are a replacement for damaged or missing cassettes on the backplate of replace upvc window handle door handles. They are sold as a single unit. They have a square-cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a great cost-effective solution to the issue of handles on your doors sagging. They are simple to install and will extend the lifespan of your uPVC door. Contact us for more information about our wide range of uPVC accessories and spares. We are always happy to provide expert advice and to assist you.