How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer assistance using the handheld computer known as Tech-2. Then a new key and transponder have to be purchased and programmed to the car.

It is a good idea to rotate your keys in order that one does not get damaged faster than the other. This will also keep your keys in top condition.

Replacement Case

The new key fobs are not like the old saab key programming keys. They have electronics which make it hard to copy. This has made theft of cars significantly more difficult than 20 years ago. It has also made it more expensive to replace lost keys.

Every owner of a Saab 9-3 needs to have at minimum two working keys. If one is lost it is expensive to add another to the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 for this.

There are several ways to get around these expensive. Some parts suppliers will use the code of an extra key to cut a new metal blade for less than what the dealer charges. The key must be the exact same as the original for it to function in your vehicle.

Follow these steps to replace the case. You’ll need a flathead screwdriver along with some patience. With the screwdriver you can pull away the plastic and take out the emergency key. After the case is open remove all electronics and place them in your new case. Make sure you insert the correct key and badge back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. Cyclone’s YouTube video Cyd demonstrates the procedure for replacing the remote fob battery with just four steps. This tutorial should work with any modern Saab key fob. However, the procedure may differ slightly.

The button is typically located just below the Saab logo on the back of the fob. This button is usually located just below the Saab logo on the back of the fob. Then, use a flathead screwdriver to insert into the small hole inside this button. This should be sufficient to open the case to allow you to change the battery.

After the new battery CR1632 is in place You can then reassemble the remote key fob. You can then program it to your car. The entire process shouldn’t exceed an hour. It’s a very easy process that does not require any special tools.

If you lose your key, the procedure will be slightly more complicated however it can be accomplished. The dealer must first read the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they will need to cut the replacement key and then program it using a brand new tool for programming called MDI.

Key Replacement Fob

The key fob is the part that locks and unlocks your car. It is equipped with an internal battery. Batteries have a finite lifespan and eventually die. It’s a common issue in all vehicles. The good news is you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs with all the electronics in place. It is easy to open the case and replace the batteries. It is important to keep in mind that you’ll need take out the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it should split open, making it easier to take it out.

If you’re planning to replace your keys, have a spare in your possession. This will save you a lot of money. If you have a spare you can have the dealer cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add a second key to your car if you don’t already have one, but it takes a great deal of research and work. The cost of adding a second key is several hundred dollars and it also requires programming of the car’s computer. Professionals can do this however it’s a costly option.

Replacement Ignition

The current saab key programming near me 9-3 is an advanced alarm system based on a key code. This means that if you lose your only functioning key, getting another key can be extremely expensive as the car has to have a special computer module installed and it also needs to be specifically programmed to accept an additional key. Locksmiths typically aren’t able to program this and even a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you the highest price to replace your car’s computer (also known as the CIM or saab replacement keys uk twice) in the event that you lose your only working key. Instead, we can reprogram the EEPROM on your existing car computer to allow it to be programmed for a replacement key, slashing over 50% of what you’d be charged at a dealership.

If you’ve been a faithful owner of an 03-11 SAAB 9-3, then you likely are aware that the ignition key isn’t the most robust. They can be extremely sticky and the buttons can be removed from them at times It is recommended that you consider replacing your ignition key if it isn’t functioning properly. Luckily, replacing the ignition key isn’t as complicated as it sounds and can be done quickly with the proper tools.