how to fix kia key Fob to Replace a Kia Sportage Replacement Key

The key on many kia ceed key fob models comes with a keyless entry system built into. The key is usually akin to an remote control, and can be exchanged with a new one from a Kia dealer or a locksmith.

Key fobs can stop working for several reasons, including a dead coin battery worn buttons signals, water damage, signal interference and a malfunctioning receiver module. Here are some guidelines on how to get your kia picanto key programming Sportage replacement key to function again.

How to replace the remote key or smart key?

The battery in your reprogram kia key fob‘s intelligent key will eventually need be replaced, whether it’s a remote key that starts with a push button or a standard metal key that doesn’t have a transponder. This is especially the case if your car displays a message that indicates the smart or remote keys aren’t powered.

Luckily, this is a relatively simple process. To replace the keyfob battery, remove your mechanical key from the slit that is located at the back of the fob. Then, pull the cover off. A small screw will be located inside the key fob, which holds the battery in the correct position. By using a small screwdriver loosen the screw and remove the old battery. Insert the new battery and then close the opening on the key fob.

Test the key fob by pressing the lock and unlock buttons. You’re good to go when the doors lock or unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers start to get cold or you have to go on errands around Brandon.

Note: Some key fobs may need to be programmed (transponder chips or smart keys). This requires a programming machine which is available to the locksmith in the automotive or dealer. Other keys (non-transponder metal keys) don’t require programming. If your key has to be programmed, you must be aware of the key code stamped on the key code tag and save the number in a secure place.

How do I replace a battery

If your Kia key fob isn’t responding to pressing the lock or unlock button on the fob, it is a good indicator that the battery needs to be replaced. A weak battery could cause other issues, such as the check engine light turning on or the engine not working properly. Fortunately, replacing the key fob battery is a fairly simple DIY task that requires only a few basic tools.

Make sure you turn off your vehicle and close all doors prior to starting. Find the small, metal or plastic piece on the bottom of the key fob. Jiggle it until the key falls out. Then, you can insert the key in the door handle of the driver to open your car.

To replace the battery inside the key fob, you must remove the cover at the rear. Make use of a plastic pry tool to loosen up the latch that holds the black negative cable. Take the old battery out, and then orient the replacement kia key battery to ensure that its “+” side is facing you, and the “-“, negative side is facing the fob’s electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.

After the new battery has been installed and the key fob is turned on, turn it off and on in the ignition repeatedly until the door locks. Then you can test your Kia key fob to see if it is working properly again.

How do you replace a smart key

Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The difference between the two is that the smart key is equipped with the small blade of a key in it, whereas the standard fob does not. Both key fobs are equipped with an internal battery that will eventually require replacing. It is a simple process which takes just two minutes.

Before you get started it is essential to ensure that you’re on a level surface with good lighting and that your Kia is not on. Keep in mind that the fob can contain tiny pieces that could fall if you’re not careful.

The release button for the small size is located on the lower backside. It could be a circular silver button or a rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob opened then you can remove the old battery and replace it. The new battery is a CR-2032, and can be bought through the internet or at a local auto parts shop. After you’ve finished, your key fob should allow you to lock, unlock, and start your vehicle even if it’s not running.

How do you replace a mechanical key

The Kia keyfob is an excellent convenience that allows us to lock or unlock our car with just pressing a button. However, like all devices there are issues with it occasionally. There are ways to fix these problems and keep your key fobs running for many years.

One of the most common problems is a weak or dead battery. This can cause your device to stop working or work intermittently. If this is the issue it is time to replace the battery a new one.

If this doesn’t fix the issue Try using a standard flathead screwdriver to open the fob’s plastic casing. Be sure not to damage any internal components, or scratch the plastic. Once the battery is removed, replace it with a brand new one.

After the new battery has been put in, close and open the doors with the mechanical key (every kia fob has an emergency mechanical key that can fit into the slot). Test the fob to make sure it’s functioning properly. If the device isn’t working, contact an authorized locksmith or dealer to help resolve the problem. To avoid future lockouts, ensure you have an emergency key that can be able to work with all door and trunk cylinders.