Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to many issues, such as dirty tracks or misaligned sliders.

Clean the track and Lubricating the rollers. You can also make use of the adjustment holes at the lower part of the movable panel to adjust the alignment of your rollers.

Tracks that are damaged or dirty

A sliding door that does not slide as it should can result from an unclean or damaged track. Over time, dirt, grit, and even rust can build up and block the track from being able to slide smoothly. The solution is to clean the track thoroughly using a brush and mild detergent. It’s best to perform this task regularly to ensure the smooth operation of your door and prevent the need for costly repairs later on.

A leaking door can also be a common issue. It needs immediate attention to prevent structural damage, water damage and the growth of mold. The problem is usually caused by worn weather stripping and misaligned doors. This can be rectified by replacing the old weather stripping and aligning the doors.

Rollers that jump off the track are another common issue that can be solved with a few minutes of DIY work. This can be a difficult task, so ask a friend to assist you. To move the rollers around, stand inside the house and lean one of the panels toward you. Once the panel is lifted off the bottom track, it’s time to set it on sawhorses to prevent it from falling off. Then, loosen the roller’s screws and then pry them out using the screwdriver. Then, you can clean any dirt that is stuck between the wheel and tracks. Clean each wheel using denatured alcohol on a rag. Reposition the wheels to their tracks and attach them again.

If a section of the track is bent, it might be possible to straighten it by using the help of a rubber mallet and a block of wood. If the bent portion is near hinges or is likely to cause further damage, it’s best to seek out a professional.

Misaligned Rollers

If your sliding door is sliding poorly it’s most likely due to the roller wheels are not aligned with the track. The wheels could be dirty, rusted or their bearings worn out. This causes friction between the bottom of the door and the track, which causes it to snag or grind when it’s shut or opened. This can also result in squeaking sounds.

Fortunately it’s a simple fix. You don’t need to remove the door to get at the wheels, since they are mounted on a bracket which is adjustable. Find the adjustment holes (usually on either side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue adjusting until the door is moving smoothly and quietly when it is open or closed.

It’s important to adjust the wheels before making adjustments to the latch. To ensure that the lock functions correctly, the latch hooks must be aligned with the strike plate. If you don’t, the latch could accidentally open or close when you’re away from the room.

The sliding patio doors are an investment. Maintaining them in good condition will ensure your family’s safety. You can avoid costly repairs by fixing common issues like faulty tracks, rollers, and handles. Contact us for more information about patio doors. We can evaluate your sliding patio door repair needs and assist you in keeping it in good shape. Our experts can also assist with any replacement parts you might require.

Damaged or loosely hung door frame

Sliding patio doors are a great addition to any home and offer an attractive and convenient alternative to hinged or swing-open patio door options. But, just like any other type of hardware, they may experience various issues over time. Fortunately, most of these issues are simple to repair with a little DIY know-how.

A gap in the frame is a frequent problem with sliding patio doors. This could be due to various factors, including misaligned rollers or track as well as a damaged or damaged door track or bent door frame. In the majority of cases the reason for this issue is easily remedied by removal of the door and reconnecting the track or rolling elements. It is important to be cautious not to damage either the frame or the track.

In some cases it is necessary to replace the entire track. This can be easily accomplished using a universal replacement kit that is readily available at major hardware stores. These kits are easy to install and will have your door operating properly again in no-time.

Examine your sliding patio door lock repair door’s hardware and frame for signs of wear, like loose bolts or screws. These are usually tightened using a screwdriver or wrench, making this an easy and effective DIY patio door maintenance procedure. Additionally, it is important to oil your tracks and rollers to facilitate smooth operation and prevent premature wear.

For many homeowners the patio doors are the main access to their backyard and outdoor living space. As such, they need to to function properly to ensure the safety of their homes and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the life of their sliding patio door repair service near me patio door and save money on repairs or replacements.

Faulty Handle

Sliding patio doors provide the perfect way to access your backyard and also enter your home, but they aren’t always easy to operate if they become misaligned or damaged. A damaged handle could cause the door to not shut or open properly. Fixing a loose handle could be accomplished at home.

In most cases, a loose handle is simply the result of screws that have worked into the backplate. To resolve this issue you can simply tighten the two screws on the inside of the handle with a screwdriver. If you notice that the handle is still loose, it may be an indication that the threads are damaged and must be replaced.

A broken latch might be the culprit. It is more likely the latch will break if it’s made of metal as opposed to plastic. You can try applying lubrication to the latch if it is not turning or catching. If this doesn’t work, you may need to replace the lock.

If the handle is cracked or broken, it could be difficult to use. If this is the case it is necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.

Feldco can help you restore your upvc patio door repairs doors to their former splendor, whether they’re brand new or old and outdated. We offer a broad selection of high-quality patio doors that come in a variety of sizes and styles. Contact us today for more about our products! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Weatherstripping that isn’t working properly

It’s time to change your weather stripping if you see light in the doors and windows or feel a draft pulling at the door or window. The strips form a tight seal that keeps unwanted insects, air, and water from getting into your home. They also help keep your heated and conditioned air inside, thereby saving money on energy bills year-round.

It may have lost its strong seal, bouncy, due to age. It is easy to determine this by running a dollar bill under the seal on the top and bottom of the jamb as well as the door frame where they meet. If the dollar bill slides effortlessly between the seal and the door then it’s time to replace the weather stripping.

If you replace only the worn-out part of the weather stripping, it could cause problems in the future with the seal. It’s more efficient to replace the entire stripping, so that you can rest assured knowing your door is properly sealed once more.

For an easy DIY project follow our guide on weather stripping to remove old weather stripping and install the appropriate material to your sliding patio door repairs near me door and frame for a lasting, tight seal. It’s a great option to repair your door and reduce your energy bills and you shouldn’t wait until it’s too late. Your wallet as well as your home will be grateful.