Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel good. However, it’s important to know that the type of handle you select must be right for your window.

The primary factor is the step height which refers to the gap beneath the handle’s nose to the base or frame. Other considerations include lockable mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. There are many styles and colours to choose from, so you’re bound to find something that matches your windows. It’s easy to make impulsive purchases especially when the handle fails, so it’s best to take your time and check some things before you commit to purchasing a new one. The first thing you should consider is what kind of upvc handle do you have now and what the difference between types is. The table below lists the most common handles so that you can select the best one to fit your upvc window.

The majority of double-glazed windows today have epag handles. They are typically attached to the frame using two screws that screw in from above and below.

They have a spindle bar on the back which can be a variety of sizes. This will determine how they operate (either left or right handed). This is why it’s essential to measure the current handle to ensure you’re getting the right replacement.

The arm is fixed to the frame using two bolts, similar to the Espag handle. The arm is curved at a low angle so that it doesn’t damage your blinds. This is a great choice if you want the handle to blend in with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This type of handle can be found on older wooden and Upvc windows.

Tilt and turn handles are usually found on casement windows. They can be operated by turning the handle or pressing on the top of the window. This opens the window from the inside and allows you to clean from outside without having to climb out onto a ladder or step over the fence. These are also an excellent option for those who have mobility issues, and can increase security and accessibility in the home.

Tips and tips and

A lot of people will need to replace their uPVC window handles at some point. It’s important to have some tips and tricks that can make the job easier.

The first thing you should do is determine the type of handle you have at home. Based on the type of handle and locking mechanism, it may be necessary to replace the lock and handle. For example, if the shoot bolts (espag) and roller cams are jammed or seizing and sizing, you’ll have to change them as well as the handle itself.

Thankfully, the majority of uPVC handles are similar and adhere to industry standard sizing, which makes replacing them a fairly easy process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. After the screws have been removed, you will be able to take apart the handle.

When you have the handle broken from the handle, it’s an ideal idea to take a note of how much of the spindle is protruding from the base of the handle. This will allow you to measure the length of the spindle to determine a replacement window panels handle. To do this, measure the amount of the square peg sticking out from the base of the handle and use it as a guide.

This is especially true for inline uPVC windows handles, as they are always straight and will only open left or right. They will not work in the middle. It’s a good idea if you’re not sure of the kind of handle you have in your home, to borrow a handle to see how it works.

Another excellent way to figure out what the hand of the uPVC window handle is is to look at how the handle turns when operating. Handles that are hand-operated will turn clockwise or counter-clockwise. If you aren’t sure you are, ask someone else to open the window with the handle to see what happens.

Measure the spindle

It isn’t easy to select the right replacement handle for your window since not all handles have the same size. It is essential to measure the spindle accurately when fitting a new handle. This will ensure that the handle fits. There are several different types of uPVC window handles and they operate in different ways, so it is essential that you know what type of handle you have as well as the type of locking system you have.

The spindle of the espag handle extends out from the handle’s rear and is attached to the lock gearbox inside the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox to open the window. They are typically used on uPVC windows with casement and can be locked with keys to provide additional security.

Cockspur handles are equipped with a “nose” which closes over the striker block in a wedge shape on the frame. They are usually found on older double-glazed uPVC windows. They are also fairly simple to use and can be locked using keys. It can be more difficult to replace these handles since they are less common than the handles with espagnolette.

If you have an open tilt and turn uPVC window then you will need to get a special type of uPVC replacement window panes handle that has an entirely different locking mechanism. The handle can tilt the window, and allow it to be rotated back and forth to fully open it. It is essential to select the handle with an opening of at least 55mm to be able to reach the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will need to be cautious when unscrewing it. You may have to open the window a little larger than usual to ensure that you can reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and verified that they are in the proper position then tighten the screws and then check to make sure the lock is working correctly.

Install the new handle

When you have the proper handle replacement it can be screwed in the right place. This will require a screwdriver, but could be simpler with an electric one. It is important to not overtighten the screws when screwing them in. This could cause the handle or knob to swell.

The other important step when fitting the new handle is to install the spindle. The spindle is the component which runs through the handle to operate the locking mechanism in the window. It is important that the part fits correctly to allow the window to open and shut securely.

There are a variety of different kinds of uPVC window handles. They include:

Espagnolette Handles – these are inline handles that can be used on windows that tilt and turn to open the window double glazing replacement.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved design which is ideal for hard-to reach windows seal replacement.

Tilt and Turn Handles these are used on tilt and turn windows for operating the opening and closing mechanisms.

They are the most popular and the majority of uPVC windows have these in place. They are commonly called ‘Bay Windows in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. However, there is no need to replace the entire uPVC window because of a broken handle. There are several easy ways to repair and replace a damaged uPVC window handle.

By identifying what kind of window you have, measuring the length of the spindle, and then purchasing the replacement double glazed windows handle, you can easily fix your broken window handle. It is essential to take your time and prioritise security when working with windows and tools however, this is a easy task. It could make the difference between having a safe and secure home, or an insecure, easily opened window! Bridgewater glass replacement on windows is the place to visit if you have any questions or would like to speak to an expert regarding replacing your window handle. We have a team of highly experienced and knowledgeable professionals who can assist with any issues you might be having.