How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique set of steps to add an additional key. It requires dealer service with a handheld computer called Tech-2. Then the transponder must be replaced and a key are required to be purchased.

Rotate your keys to prevent one from wearing out more than the next. This will also ensure that your keys remain in good condition.

Replacement Case

The new key fobs for keys are not like the old saab 900 key keys. They have electronics that make them difficult to copy. This has made stealing cars much more difficult than it was twenty years ago. However, it has made the replacement of lost keys a comparatively expensive endeavor.

Every owner of a 9-3 Saab should have at a minimum two functioning keys. If one of them is lost, it costs a fortune to get another one for the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 for this.

There are a few ways to avoid the high price. Some parts suppliers can look up the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade out of metal for less than the dealer’s cost. The key must, however, be identical to the original in order to function within your car.

You can also replace the case yourself by following these steps. You will need to have an open-faced screwdriver and patience. Using the screwdriver, slowly pull the plastic apart and separate the emergency keys from the case. Once the case is opened, take out the electronics and put them in your new case. Make sure you put the correct badge and key back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. Cyclone’s YouTube video Cyd shows how to replace the remote fob battery in just four easy steps. This tutorial is suitable for any modern saab 93 key replacement 9-3 Key Replacement (https://Hailsofa2.Werite.Net/7-Practical-Tips-For-Making-The-Most-Out-Of-Your-Saab-Key-Replacement) key fob, although the process might differ slightly.

The button is typically located close to the Saab logo on the back of the fob. This button is typically located on the back of your fob just below the Saab Logo. Then take a flathead screwdriver to insert into the small hole inside this button. This should be sufficient to open the case so that you can replace the battery.

After the new battery CR1632 is installed, you can reassemble the remote key fob, and then program it to your car. The whole process should not be more than an hour. It’s a very easy procedure that doesn’t require any special equipment.

The procedure is a little more complicated if you’ve lost the key, but it’s possible. The dealer will have to verify the VIN of the car, and then request a replacement saab 9-3 key key blade and TWICE module with the correct unique code. After that, they will have to cut the replacement key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob contains an internal battery that is used to lock and unlock your car. The batteries are able to last for, and they will eventually expire. This is a common problem that happens to all cars and the good thing is that you can change the batteries in many fobs, without replacing the whole case. You can purchase replacement fobs from Amazon that come with all the electronics already installed, so you can simply open the case and replace those batteries that are old. You’ll need to take out the emergency key before you can replace the batteries. To accomplish this, simply insert an small screwdriver with a flat head into the slot that is in the middle. The case should split when you turn the screwdriver around it.

If you’re about to replace your keys, ensure that you have a spare since this will cut down the total cost by a significant amount. If you have a spare, you can ask the dealer cut an entirely new key and then program it into your car, which is much cheaper than replacing the whole key fob.

It is possible to add another key to your car even if you don’t have one, but it requires some research and effort. It costs a few hundred dollars to add an additional car key. The computer of the vehicle must also be programmed. Professionals can do this but it’s not a cheap option.

Replacement Ignition

The current SAAB 9-3 is an alarm system that is more sophisticated built around a key code. This means that when you lose your sole working key, replacing it with an additional one could be extremely costly since the car needs to have a special computer module installed, and it also must be specially programmed to accept a new key. Dealers can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.

Dealers will charge you a high price to replace your car computer (also called the CIM or saab spare key twice) if you lose your only functioning key. Instead we can reprogram the EEPROM of your current car computer to prepare it for a new key, slashing over 50% of what you’ll pay at a dealership.

If you’ve owned a saab key fob repair 9-3 quite a while, you know that the ignition keys are not very durable. They can become incredibly sticky, and the buttons can fall off every now and then, so you should consider getting a replacement if yours isn’t working as it should. Luckily, replacing the ignition key isn’t as complicated as it sounds, and it can be done fairly quickly with the proper tools.