Choosing Upvc Window Replacement Hinges

It’s not as difficult as it may seem to choose and fit the replacement hinges made of upvc. It is essential to verify that the arrows on the hinges are facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are a few different kinds of hinges that you can pick from, each with unique features. This article will review the most popular types of uPVC window hinges and the advantages they offer.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape safety window as they open to a full 90 degree angle. They can be disengaged to a ‘easy-clean’ position that allows you to see the outside of windows without having to climb ladders or lean at dangerous angles.

Yale is one of the most reputable and well-known brands in the world of home security. They are suitable for all kinds of upvc window hinge problems side-hung windows. They can be moved into the clean position by pressing in a small button and then moving the window sash to one side. After closing, the sash will automatically return to its original operative position.

Both 13mm and 17mm are both available. Utilize our Egress Selection Guide to help you choose the right product for your window.

The hinges are designed to be used with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the possibility of an accidental closure in high winds. They have been tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and doesn’t have any buttons or catch. It is a simple and safe solution to emergency exit and cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip located on the inner side of the bottom corner. This will open both the top and bottom catches which will allow you to move the sash towards the clean position. Once you are in the clean position, close the window to reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as “Easy Clean” hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These double glazing hinges permit a larger opening in the event of a fire. Building regulations require that this kind of hinge must be installed in any room that has windows.

The windows have a friction stay that allows the windows to open up to a 90-degree angle. They also allow the opening sash to slide across the glass when opened which allows for easy cleaning without having to use ladders. The hinges do not have buttons or catches and operate with a simple, secure lever that is accessible from the inside of the home.

The hinges, manufactured in the UK by Cotswold are fitted with a child safety feature for daily use. This can be overridden using an invisible button. You’ll have peace of assurance that your children will not accidentally open the doors too far. They are available in 13mm and 17mm stack heights.

Take a measurement of the length of the current side-hung window hinge that is fixed to the frame. (See the guide for measuring upvc window hinges repair hinges for upvc doors). Choose the right size hinge below.

Please note that this measurement is taken at the part of the hinge that is attached to the frame, not the sash. The actual hinge length could be shorter or longer depending on how your old windows were manufactured. When choosing the size of the hinge, the majority of frames made of upvc can accommodate with a height of 13mm however if your previous window frame measures 17mm, then select this option. Alternatively you can fit the 4mm packer to make up the difference. All hinges come in two different directions (1 left and one right). Screws are not included with the hinges. If required, these screws can be purchased separately. Our upvc window repair screws are highly recommended. They are specifically designed to improve the performance of your hinges and allow them to function efficiently for a longer. They feature a design with reduced friction and a heightened weather seal with a nylon reducer cap.

Restricted Hinge

There are instances when windows must open fully and this can be difficult with a standard hinge. These child safety friction hinges are a great solution to this problem. They can be used when ventilation is required but cleaning or escape from a fire is not possible. They work by restricting the amount the sash can open and allow the override of this restriction with the push of a button. They are suitable for both side- and top-hung windows. They are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge combines the characteristics of a standard restrictor as well as an escape hinge to offer an effective and simple way to comply with building regulations. It is available in 13mm and 17mm stack heights and can be used for both top and side opening uPVC window. It comes in a pair, with one hinge being the restricted egress, and the other being the unrestricted. This allows one to be installed at the bottom while the other is set on top.

These upvc door hinge removal hinges are made to be used with windows that aren’t able to be fully opened, like bedrooms for children. The mechanism restricts how far the sash can open to 100mm in a safe distance and then re-engages when the window is shut.

These uPVC hinges with friction can be used with all types of windows. They are especially useful for windows that are hard to reach, like those in three-storey houses or those that require a ladder. They can be combined by our security enhancements like hinge guard protection plates or dog bolts to offer PAS 24 performance.

When replacing a window hinge, it is essential to measure the length of the current hinge so that you can purchase replacements that are similar in size. This can be accomplished by looking through the image gallery of the hinge and then deciding where you would like it to be. The top-hung hinges can only be placed on one side, whereas the side-hung hinges can only be placed on one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and don’t require additional parts to help reduce friction. It is available in many finishes and also has a fire rating. To quickly determine the radius of hinges, lay it out flat and place a quarter and dime in two corners. If the dime is more snug and the corner is round by 1/4 inch. If the quarter fit better, it’s rounded to 5/8 inch.

Choosing the right type of hinge can determine the success or failure of your door’s appearance. Matching the style and finish of the hinges to your door will create a cohesive and attractive design.