Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. This system is discrete and does not require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then authorize the vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system may aid in finding your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, in contrast, do exactly what they state on the tin: they shut off your car’s engine so that it isn’t able to be started. The Autowatch ghost vehicle immobiliser immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk or window buttons. In addition to this, there is also an app for mobile devices that can function as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This option is particularly useful when you need to surrender your car to a valet service or parking because the immobiliser will remain activated and not disabled.

The Ghost is an innovative and unique device that works by using your vehicle’s buttons rather than as a standalone unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch bmw m3 ghost installer immobiliser is an advanced security device that protects your vehicle from key cloning, hacking & ECU swapping. It’s a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be placed in the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it is compatible with all vehicles. It is also resistant to jamming devices that are the most common method used by thieves to bypass the immobilisers in place.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It isn’t detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by conventional diagnostic tools. The Autowatch Ghost doesn’t use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a unique sequences for disarming. This sequence can be extended 20 or more presses for extra security. The iPhone app lets you make a single, authorised connection using the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start when the correct PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can offer your vehicle to an attendant or valet without needing to enter a code.

Tested for each vehicle

The Autowatch ghost installation near me is the world’s first aftermarket immobiliser on the CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable the system of your vehicle from performing its normal start-up routine until you input a custom passcode. The system can be turned on and off using your own smartphone app without the need for wires.

Standard factory immobilisers in vehicles work by having a transponder built into the key that transmits a signal to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced with one from a different vehicle, the immobiliser will not recognise it. This allows the vehicle be stolen and started. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It safeguards your vehicle from key cloning, hacking and even key theft. The only way thieves could steal your car is physically towing it away, and even then they wouldn’t be able to drive it.

bmw x5 ghost installer immobiliser and tracker; please click the next website page, uses buttons on your vehicle, including the indicator stalk, the steering wheel, and the doors, to generate unique PIN codes that needs to be entered to use your car. It does this without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, so thieves cannot utilize sophisticated RF scanning or code grabbing techniques to discover that a security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is hidden within the vehicle to ensure that it can’t be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming using the use of a button sequence. This makes it a perfect complement to a GPS tracker which helps locate your car after it’s been stolen.

Override of emergency PIN code

You don’t have to look far on social media for stories or videos about cars that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

The Ghost immobiliser was designed to combat this and provide you with an additional layer of security in order to keep your vehicle from being targeted by thieves. It creates an unique pin code push sequence using the buttons you have on the steering wheel, door panel, and centre console. This unique PIN is entered in conjunction with the original key fob to prevent the engine from getting started. The unique override pin is found on a black card which you will receive following your installation. It is simple to remember because there are no LED indicators.

The device is hidden in the wiring of the vehicle and doesn’t emit radio signals. This means it can’t be detected using diagnostic software which can identify the type of security system you have installed. This makes it a fantastic alternative to a tracking device.

Contrary to other security systems which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They also work with valet/service modes and is a great alternative to a tracking device if you bring your vehicle to the dealer to address an electrical issue.

Service/Valet mode

In recent times, there has been a increase in the number of vehicles being stolen with no owner’s keys. It’s easier than ever to take your joy and pride thanks to the availability of key cloning tools & door lock picks. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car was stolen.

It communicates directly to your car’s ECU (Engine Control Unit) through the CAN data circuit. It’s completely silent since it doesn’t use radio frequencies or key fobs. This means that it can’t be detected by diagnostics or other vehicle hacking devices. It also protects against adding an additional key or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console & door panels. A unique & changeable PIN code sequence up to 20 digits needs to be entered before you can start your car.

This is the first aftermarket CAN bus immobiliser that has been designed. It will stop your vehicle from being driven or started if you don’t enter a PIN code first. If you’re driving away with the device armed it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you do not enter your PIN at this time, the indicator will continue to flash and require a new pin code every time you try to start your car.