Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window hinges for replacement isn’t as difficult as you think. It is important to check the arrow on the hinges are facing the correct way and also the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are a few different kinds of hinges to pick from, each with unique characteristics. This article will discuss the most common types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading windows for fire escapes since they are able to open at a 90-degree angle. They can also be lowered to an easy clean position to allow you to easily access the exterior of windows to clean them without having to climb a ladder or lean over at potentially dangerous angles.

These heavy duty egress hinges are made by Yale one of the most known and trusted home security brands on the market today. These hinges can be used with any kind of uPVC side-hung window. By pressing a small button the pvc window Hinges sash is moved to the side and then into the position that is easy to clean. When the window is closed, the sash will revert to its original position.

They are available in 13mm and 17mm stack heights. Based on the size of your existing window we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.

These hinges are designed to work in conjunction with a standard side-hung frame, either uPVC or aluminium. The friction screw is used to adjust the resistance. This makes opening the window simpler and less likely of closing the window accidentally during severe winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

There are no buttons or catches The Nico Egress Easy Clean Friction Hinge is simple to use and provides a simple solution for emergency egress and safe cleaning. Use the hinge retention clip located on the inside of the bottom corner. This will release the top and bottom catches, allowing you to move the sash into an easy-clean position. Once it is in the easy-clean position, close the window to reset the hinges back to their original position.

Fire-Escape Hinge

Fire Escape Hinges (also called “Easy Clean”) are used to replace windows that open sideways for fire safety reasons. These types of window hinges near me hinges open more wide and faster than standard hinges to allow a large clear opening to escape in the event of an incident of fire. This type of hinge is legal in any room with a window as required by building regulations.

They feature a unique friction stay that allows the window to open at 90 degrees and also allows the opening sash to slide across the glass when it is open to make it easy to clean the external side of the glass without needing to use ladders. The hinges do not have buttons or catches and operate with a simple, secure lever that is accessible from inside the home.

The hinges, which are manufactured in the UK by Cotswold and Cotswold, have a child safety feature for everyday use. It can be reverted with an invisible button. You’ll be able to rest of assurance that your children won’t open the doors too far. The stack heights are 13mm or 17mm.

To purchase these hinges, take a measurement of the length of your current side-hung window hinge which is fixed to the frame (see the article on measuring your upvc window hinges). Then, select the appropriate size hinge from the selections below.

Be aware that the measurement is taken from the part that fixes to the frame not the sash. The actual hinge length could be longer or shorter depending on the manufacturer of your old windows. When deciding the width of the hinge most upvc frames will fit with a height of 13mm however if your previous window frame is 17mm, then select this option. You can also use the 4mm packer to make up the difference. All hinges are supplied in pairs (1 left and 1 right). The hinges do not include screws. These can be bought separately if you require. Our upvc window repair screws are recommended. These screws are designed to improve the performance of your hinges and allow them work efficiently for a longer. They come with a lower friction design and a heightened weather seal, which includes caps made of nylon.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These child safety hinges help to overcome this issue and offer a fantastic solution when ventilation is needed but access how to replace upvc window hinges clean up or escape in case of fire is not feasible. They limit the number of times you can opening the sash and allow overriding this restriction by pressing the button. They are suitable for both side and top-hung windows. They are available in 17mm and 13mm stack heights.

The Nico Restricted Egress Hinges combine the benefits of a standard restrictor, and a pivot for fire escape to provide a simple and efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and is suitable for the top and side openings of uPVC window. It comes in two pieces, with one hinge being the restricted egress, and the other hinge being unrestricted. This allows one to be placed at the bottom, while the other is set on top.

These uPVC restricting hinges have been tested to BS6375 part 2. They are intended to be used on windows that isn’t able to be fully opened, like a small child’s bedroom. The mechanism restricts the distance the sash opens to an appropriate height of 100mm and then it re-engages after the window is closed.

These upvc window hinge hinges with friction can be used on all kinds of windows. They are particularly suitable for windows that are hard to reach, such as those in three-storey houses or those which would require ladders. They can be combined by our security enhancements such as hinge guard protection plates or dog bolts to offer PAS 24 performance.

When replacing a window hinge it is crucial to determine the length of the current hinge so that you can purchase replacements that are similar in size. This can be done by looking at the picture gallery of the hinge and deciding where you would like it to be. Top hung hinges can be restricted on both sides, while side hung hinges can only be used only on one side.

Standard Hinge

A standard hinge has metal-to-metal contacts and has no additional parts to reduce friction. It is available in a variety of finishes and is also fire rated. To determine the radius of your hinge put it on its flat surface and then line up the quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch. If the quarter fits better, it’s rounded by 5/8 inch.

Selecting the right hinge can make or break your door’s appearance. Matching the style and finish of the hinges to your door will give it a cohesive and attractive appearance.