Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob stopped working for a while, it could be due to a dead battery in the coin, water damage, receiver module issues or a faulty electronic chip. These are all easy fixes and you can restore your replacement car key peugeot 207 to speed in a matter of minutes!

The key blade may become worn-out and cause a faulty car key. This can be fixed if you visit your local Car Key Man Auto Locksmith and let them fit the new key blade for you.

Battery

The key fob in your peugeot boxer key fob programming 308 may die or become weak enough to not transmit a strong signal. The key fob may not function and stop you from locking or unlocking your doors or even starting your engine. To fix this, you’ll need to replace the battery inside the key fob.

You can purchase a new battery at an auto parts store or at your local hardware store. When you purchase the battery make sure that it’s brand new and hasn’t been sitting on the shelf for too long. A brand new battery will have greater capacity and will also be able to send a stronger signal to the car.

After replacing the battery After replacing the battery, try locking and unlocking the doors of your peugeot 207 replacement key fob with the key fob. If the doors don’t open it’s likely that the receiver module in the car is the cause. Your local Peugeot dealer can reprogramme the receiver module.

The chip inside the key fob could also be damaged. It’s possible to cause damage to your key fob if you drop it on the ground, or expose it to water. The rubber seals that protect your chip from moisture could wear out over time. This is especially the case when you expose your key fob to water for prolonged periods of time, like swimming it in the ocean. To stop this from happening, you must protect your key fob from moisture and never let it come into contact with water.

Water Damage

If your key fob becomes soaked, regardless of whether you dropped it in the pool or threw it into the puddle, don’t believe it’s a lost cause. The key fob is protected by rubber seals, but prolonged exposure to water can harm its electronic chip. Since water is an excellent conductor, any water that gets inside the key fob could result in a series of short circuits that will eventually destroy the chip. After taking the battery out, clean its contacts with isopropyl ethanol and dry it completely before putting it back into.

A dead battery can also be the reason why your Peugeot 308 won’t start. If you have a spare vehicle, jumper cables may be used to get the engine going again. If you suspect that the battery is at fault then it must be replaced.

Another possible cause is an ineffective receiver in the vehicle, which may prevent it from receiving a signal from the key fob. It could be a issue with the antenna, or wiring, or the key fob may be damaged. If you have the latest key fob, it might need to be programmed to the vehicle. If you’re not able to solve the issue, call a professional technician. A trained technician will be able identify the issue quickly and resolve it in a timely manner.

Radio Interference

For example, a keys not being recognized or having a narrow range often mean that there is an interference in the system. This is either radiated or conducted, with the latter being caused by power supply cables and the speaker wiring being too close to electrical components. Generally, re-routing the cables or moving them away from these components could solve the problem.

It’s unlikely that anyone is listening in on your key fob signals to steal your car, however it is possible that the signal has been muffled by radio frequency interference. Luckily, this is a simple issue to fix.

If you are having keys that are not recognized, try an entirely new battery. Make sure the battery is of the correct size and type. Batteries that are not of the correct size can cause damage to your device.

These devices can interfere with the key signal if they operate on the same radio frequency. Avoid connecting these devices to your key fob.

Pairing Issues

The remote keyless entry system in a car has a receiver that receives radio signals from the key fob. You will not be able start your vehicle if this receiver isn’t working, even if your key fob is in good working order and can be reprogrammed. The issue can be caused by a number of causes, including a dead coin battery and water damage. The receiver may be malfunctioning because of an error in the software or internal damage to the key itself.

One of the most common reasons that your Peugeot 308 key fob isn’t functioning is that the coin battery inside has died. The battery can be easily replaced, but you must ensure that it’s the correct battery for your keyfob. If you use a battery that is not correct, it could cause further issues with the key fob, so it is recommended to use either the original battery or an alternative that is similar in size, voltage and specifications.

Your peugeot 208 key fob [olderworkers.com.au published an article] 308 keyfob may not function if it was associated with a different vehicle. It is possible that you have accidentally given your key fob away to a friend or the key was used to unlock other vehicles. It is possible to fix this issue by reprogramming the key fob with an OBDII scanner. This tool typically asks you for certain information regarding your vehicle, for example the VIN or engine type, so it’s crucial that you enter this correctly.