Reasons Your fiat van key replacement 500 Key Fob Won’t Work

A fiat abarth key 500 key fob makes it simple to open doors and start your car. There are a myriad of reasons the fob could stop functioning. These include a dead coin battery damage to the receiver module, issues, and interfering.

This listing is for an NEW replacement fiat 500 key fob fiat 500x key fob programming Flip Key Remote that is similar to the Ilco brand. It has to be professionally programmed (click here to search for local locksmiths for automotive locksmiths). It comes with trunk, lock and unlock buttons.

Dead Coin Battery

The most common reason your 500 key fob doesn’t function is due to the battery is dead. Modern key fobs come with a limited operating range and must be within some feet of the vehicle to function. If you’re not close to your vehicle when you press the key fob button the car will not respond, and will display the “Key Fob Not Detected” message in the instrument cluster.

If this occurs, replace the coin-cell battery (Part Number CR2032) by a fresh one from a reputable brand such as Panasonic Duracell or Energizer. You can usually find them in your local hardware store or on the internet.

After you’ve replaced the battery in the coin cell It is possible to test it by standing close to your fiat punto remote key price 500 and pressing the buttons. The car will blink its parking lights, and the key fob should operate the lock and unlock switches.

If your fob’s key isn’t working after replacing the battery, there could be water damage that has prevented it from communicating with the module inside your vehicle. Water damage can happen in a variety of ways, ranging from an accidental splash to submerging your fob in salt water at the beach. If you suspect that your fob was exposed to water, put it in a bag of rice to draw out the moisture. If that doesn’t work the fob might need to be reset by an experienced auto locksmith or by the dealer.

Water Damage

While the fob comes with rubber seals that keep water from the chip’s electronic circuit and out of the ocean or washing it in a machine could cause water damage. Saltwater is especially dangerous to the fob’s circuit board and can cause it to short out and eventually die. Getting the fob wet is not an ideal idea however, if you drop it in the water in a cup or don’t remember to take it out of your pants pocket before running the washer, don’t give up hope.

First, remove the battery. Clean the electronic chip with isopropyl alcohol or a similar product and then dry it completely before replacing the battery. Next, test the fob to see if it works. If the fob doesn’t work, it may have to be reset. This is usually handled by a professional or dealer auto locksmith.

If the key is older and was not programmed to your car, it will likely need to be replaced completely. A professional automotive locksmith can carry out this simple task. The locksmith needs to cut the key to match the ignition of your car. They’ll also need to reprogram the fob for the system of your car. This is a cheap and quick procedure that can be completed within the same day.

Receiver Module Issues

One of the simplest reasons why your 500 key fob might stop functioning is that it’s out of range. The remote usually has an operating range of 30 feet or less, and if it’s too far from your vehicle, it won’t respond to your commands. This can easily be resolved by moving it closer to your vehicle until it begins responding.

If you’ve replaced the battery on your coin (commonly known as a “button” or “watch”) and the fob won’t work It could be because of an internal circuit board problem. Reprogramming the fob is usually the solution to the issue. You can find the instructions on how to do this for the majority of vehicles by searching YouTube or looking through the owner’s manual.

It is possible to replace the clips made of metal that hold the coin batteries in the correct position. If they loose tension it could prevent the coin battery from sitting properly and could cause your remote to malfunction.

In rare instances, the fob might be out of connection with your vehicle as a result of hardware or software problems. You can fix this problem by visiting your local dealer or auto-locksmith to reprogram your key fob. In some instances, they may need to reinstall the program in your body control module, too.

Interference

Interference can also cause the key fob to not receive or transmit an signal. This is possible when the key fob is located near an electronic radio transmitter (cell phones and radar detectors) or any other source of electromagnetic radiation. The key fob might not function because of a weak connection to the buttons, water damage or damage to the internal chips.

If your key fob suddenly stopped working, or you’ve tried everything at home to fix it (e.g. You might have a damaged 500 receiver module after you’ve tried replacing the battery, reprogramming, or using a spare key fob. The receiver module is situated under the dash and picks up the radio frequency signals from the key fob. Then, it converts them into electronic commands that the vehicle interprets.

There is a simple way to reset the 500’s internal system, including the keyfob. Disconnect the 12 volt battery for about 15 minutes by taking off the negative cable first then the positive cable. Then, reconnect the battery. This will get rid of any residual electricity and restart the lost car keys fiat‘s computers, which could help get your key fob working again. If the problem persists it is recommended that you consult an experienced technician. They can determine the exact cause of your problems.