How to Replace a Saab 9-3 Key

The Saab 9-3 is an excellent car that has a lot of driver appeal. It is a powerful engine with excellent visibility. It also has a high safety rating.

It is vital to have two keys that work for your vehicle. If you lose one key, it can be very costly to buy the new one.

How to replace the ignition Key in a Saab9-3

You’ll have to change your car key if it won’t turn. This guide will explain how to replace the ignition key on a saab key replacement 9-3. You will need to replace the key, buy an additional reprogrammable cell and buy a brand new case for your key-fob.

The most modern Saab models employ transponders instead of a metal key to unlock the vehicle and allow it to start. The problem with this is that the reprogrammable battery in the key-fob eventually wears out and not hold a charge any longer. This is particularly the case if you use the same key for the same lock.

A professional locksmith can change the battery quite easily. If you have the right tools and patience you can do it yourself. The first step involves separating the key-fob. Insert flatheads into the slot that is in the middle of your case. The plastic is thin and is easily damaged.

After the case has been opened and the case is opened, you can make the new key by combining the lower section of the old key and the transponder and banana on the new key. This will ensure that the new key is mated to the CIM correctly, which could be the difference in replacing the only key for your Saab 9-3.

how to program saab 9-3 key fob do I replace the ignition Key in a saab key fob programming 900

If you don’t have two keys, you’ll need to take off the steering wheel and dashboard for access to the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can remove all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dash is removed, you can put screws into the hole behind the ignition switch.

The ignition barrel has an ignition lock that can prevent the car from starting if a key isn’t inside it. If the ignition switch on your 900 isn’t working properly, you should check whether the key is inside the lock or inside the ignition barrel. You should also rotate your keys and keep them clean to avoid bent.

Saab cars differ from other cars because they don’t use traditional metal keys. Instead, the car can recognize the electric signals of the key fob through a special chip in it.

If you lose only one working key fob, the dealer will charge the highest dollar for replacing the computer module (known as the CIM). We can reprogram the EEPROM on your current computer to make it accept new keys, without the need to replace it. This will save you over 50% of what the dealer charges! We call it the saab key fob replacement Key PROGRAM. Learn more about it here!

How to Replace the Ignition Key in a Saab9-5

The metal portion of a traditional Saab key is simple to copy, and is also not a major obstacle against vehicle theft. The electronic portion of the key-fob has a chip that recognizes the car when the key is put in the ignition switch.

Saab has relied on the technology of this anti-theft device for more than 10 years. It’s not as effective as an actual lock on the door however it makes the process of stealing your vehicle harder. Every Saab Key Code owner should keep an extra Saab key in their car.

Most new Saabs come with two keys at the factory, however you can upgrade them at an authorized dealer using a handheld computer, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 vehicles that have more modern, more advanced features that require a key-fob.

The dealer will replace the CIM or TWICE module in these cars if all keys are lost, and charge you a premium to do it. However, we can reprogram the EEPROM on your computer and set it up to accept new keys, without having to replace the expensive modules.

How to Replace the Ignition Key on a Saab XC90

It’s possible to replace your SAAB key fob if you’re experiencing issues turning the barrel of your lock. Fortunately, the process is quite simple and doesn’t require you to visit a dealer. Instead you can do it yourself at home by using the help of a few tools.

First, you’ll need to prepare the new keys. Before you begin, ensure that the anti-theft feature is disabled by placing blocks on the rear wheels and engaging the handbrake. Then, insert the key into the ignition and turn it to the ON position which activates the accessories but doesn’t start the engine. Repeat this five times and leave the key in the on position.

You’ll then have to buy a new case for your key fob. You can find them at any auto parts shop, and they’re usually quite affordable. Depending on the model, you can even get them without any electronic components.

To open up the case, place a flathead screwdriver inside the slot located in the middle and slowly work it. When you’ve split the case, you will have access to all the internal electronic components. To get rid of the electronics, make use of a small screwdriver, and try to pry them out in a gentle manner.