How to Replace the Replacement Key Battery For the saab fob key replacement 9-3

Saab owners have a unique procedure to add a second key. It requires dealer service using a handheld computer called Tech-2. A new key and transponder must be purchased and programmed to the car.

It is an excellent idea to rotate your keys in order that one does not get worn out more quickly than the other. This will help keep your keys in pristine condition.

Replacement Case

The new key fobs for keys are not like the older saab 9-5 key replacement keys. They have electronics that make it difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. But, it has also made replacing lost keys an incredibly expensive endeavor.

Every owner of a Saab 9-3 should have at a minimum two functioning keys. If one of them is lost, it is expensive to get another one for the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to avoid these costs. Some parts suppliers will find the code on an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade for less than the dealer’s cost. The key, however, must be the same as the original one in order to function in your vehicle.

Follow these steps to replace the case. You’ll require a flathead screwdriver along with some patience. With the screwdriver, break apart the plastic, and then take off the emergency key. Once the case is open, take the electronics out and put them back into your new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the saab car key 9-3 is an inexpensive part that can be replaced quickly and easily. This YouTube video from Cyclone Cyd demonstrates how you can replace the remote fob battery with just four simple steps. This tutorial will work with any modern saab spare key key fob. However, the process may differ slightly.

The first step is to locate the button that releases the backup key on the fob. This button is usually on the back of the fob close to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole on this button. This will be enough to allow you to open the fob’s case so that you can replace the battery.

After you have installed the new battery CR1632, you are able to restore your remote key fob. Then, you can program it into your car. The entire process shouldn’t take more than an hour. It’s a very easy procedure that doesn’t require any special equipment.

If you lose a key the procedure will be a bit more involved however it can be completed. The dealer must first read the VIN of the vehicle before requesting a replacement TWICE module and key blade that is matched to the unique code. The dealer will then need to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is equipped with a battery that is used to lock and unlock your car. Batteries have a finite lifespan and eventually will die. This is a problem that occurs with all vehicles and the good thing is that you can replace the batteries in most key fobs without replacing the entire case. Amazon sells replacement fobs that already have all the electronics in place. It is easy to open the case and replace the batteries. It is necessary to remove the emergency key before you replace the batteries. To accomplish this, simply insert a small flathead screwsdriver into the slot that is in the middle. Use the screwdriver to move around the case until it will split open, making it easier to take it out.

If you are about to replace your keys, ensure you have spare keys, as this will reduce your total cost by a substantial amount. If you have a spare you can ask the dealer to cut a new key and program it to the car, which is cheaper than replacing the whole key fob.

It is possible to add another key to your vehicle If you don’t already have one, however it requires a great deal of research and effort. It will cost you a few hundred dollars to add a second car key. The computer of the vehicle also has to be programmed. Professionals can do this however, it’s a costly option.

Replacement Ignition

The modern SAAB 9-3 uses a more sophisticated alarm system based on a key code. This means that should you lose only one working key, acquiring an additional one could be extremely expensive because the car needs to have a specific computer module installed, and it also needs to be specifically programmed to accept an additional key. Most locksmiths can’t do this and even dealers can charge several hundred dollars to program the new key!

If you’ve lost only one working key, a dealer will replace the computer in your car (known as the CIM or saab key replacement near me TWICE) in order to make a replacement, and they will charge a premium for it. Instead, we can reprogram the EEPROM on your existing car computer to allow it to be programmed for a new key, saving you over 50% of the price you be charged at a dealership.

If you have owned a SAAB 9-3 a long time, you know that the ignition keys are not very durable. If the ignition key you have isn’t functioning properly, you must think about replacing it. They can become sticky and the buttons can fall off. It’s not as difficult as you think to replace the ignition key. With the appropriate tools, it could be accomplished quickly.