How to Repair a Saab 93 Key Fob

The Saab 9-3 keyfob could have a faulty chip. The metal component of the keys from the past was easy to duplicate, but modern key fobs come with an immobilizer system that protects your vehicle.

To determine why your key fob won’t work change the battery of your coin. It’s a cost-effective and easy fix.

How to program the saab key fob 93 key fob

Saab keys let you to control the trunk, doors, and engine of your car. They also allow you to unlock your car’s fuel door and panic buttons. Remotes can also be programmed using the car’s transmitter. To do this, put the key into the ignition and switch it to the ON position. Follow the directions on the Tech2 until you have programmed all of the keys you wish to work with your vehicle.

Saabs are typically sold with just one key, despite the fact they were originally designed with two. You can add another key by re-installing the transmitter (which includes the transponder) and programming it in using a handheld computer known as a Tech-2 at your Saab dealer. You’ll also require a new key that matches the old one in order for it to function. This is a pricey task, but less expensive than replacing the entire CIM system and locking cylinders in the event that you lose the sole key that works.

Saab 93 replacement key fob

saab 9-3 key owners who lost their keys must order an additional one as soon as they can. The key fob isn’t as traditional keys made of metal used in automobiles 20 years ago, but is an electronic device that communicates with the car through a specific chip. This is how the car detects the key fob and prevents it being copied. It is possible to do this at an auto dealer, but the cost could be high. You can avoid this problem by purchasing a brand new Saab key online.

The main reason for having an extra key is to make your car safer if you ever lose it. A burglar is more likely locate a spare key rather than an unintentionally stolen one. The majority of thieves do not have the tools required to copy these newer keys. Even if they had a specially designed machine, it will not be foolproof.

Another benefit of having a spare key is that it can save you money on replacing the battery in your SAAB 9-3 remote key. All electronic units within the key fob come with batteries, and eventually die. It is fairly easy, however you need to be careful not to harm the electronics inside the case. You can view videos on Youtube to learn how to do this task, such as those made by Cyclone CID.

Saab 93 key fob battery

It’s likely time to replace the battery in your key fob when you’ve noticed the response time is slow. A dead battery could be the reason for the delay. However, there are other possible reasons. This is a cost-effective and easy fix, so don’t delay.

The first step is to remove the backup key from the fob. To accomplish this, press firmly on the saab key programming logo and pull on the key ring loop. Insert a flathead screwdriver into the indentation on the key fob case. To remove the case, turn the screwdriver. The plastic shouldn’t be damaged if you don’t apply excessive force.

Once the case has been opened you will be able to see the electronics inside. The circuit board is attached to the clips that hold it in place. If they are rusty or dirty, the fob will not perform as it should. You can clean the fobs using rubbing alcohol. This is only temporary solution. The clips will wear out again eventually and require to be replaced.

Test the car door locks using the backup remote before replacing the battery. If the backup remote is working and locks, then the issue is most likely related to your primary key fob. Replacing the battery should resolve the problem, but if experiencing delays when you lock or unlock your doors, there’s a good chance that something else is wrong with the car.

saab 900 key keyfob case with 93 keys

If your key fob case is looking worn out an easy solution is to buy a new. These are available on the internet and can be easily installed to your existing remote control. All you require is a flathead and a bit of patience. Just insert the screwdriver into the slot in the middle of the case and gently work it to split open. Be careful not to cause damage to the limiters that keep the battery in place. The new case can be installed in the existing electronics after taking out the emergency badge and key. No reprogramming is needed.

The best key fob case is one with a special lining that hinders signals from reaching the key fob. This is important because the signals are the ones that allow your car to start. Certain cases have silver layers, while others are made from copper, which can distort transmissions.

Key fob covers are also a great way to safeguard your keys from damage. It can help you keep track of your keys and will also help you locate them when you’re driving to your car. A quality key fob cover will keep your keys protected from theft, and will also add a bit of fashion to your keychain.