Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However If you have double glazed window repairs near me pane windows that are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor which could cause them to be trampled.

It’s a good idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sliding. A sagging window in upvc window repair can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you’ll have to open the window so that you can get to the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you’ve moved your hinges. If you are happy with the size of the window, you can tighten screws to hold them in place.

If you aren’t able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it’s essential to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be due to the mechanism of the handle wearing out. It’s relatively easy to fix a loose uPVC handle. First, you’ll need to close the window and perform an initial test fit. The corner joints of the sash must align with the casing joint. If it isn’t, you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is important to act if you get up each morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaks in upvc window Repair windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk’ as this will only make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal than the frame. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler when you have a person to help you hold the frame in place.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you advice.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also be unbalanced due to wear, which can cause a gap where the sash meets frame. If they are beyond repair, it could be necessary to have them realigned. Second, the interlock can also become misaligned. It is located on the hinge’s side, and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window repairs near me sill. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach the point when it’s more economical to replace them than fix them. If you are experiencing issues with your upvc window you should consult a professional immediately.