Peugeot 3008 Key Fob Problems

The mid-sized SUV from peugeot expert key fob, the 3008, has a number of positive aspects. It’s well-designed, it drives great and has a big boot. But is it capable of beating against strong competition in the most congested sector of the market?

If your Peugeot keyfob doesn’t work It could be because it was exposed to soapy or clean tap water. You may need to remove the battery and clean it with electronic cleaner or isopropyl alcohol.

Dead coin battery

Peugeot key fobs come with tiny coin batteries that powers their remote locking and other features. The battery has a short time of life and will wear out over the course of years of use. One way to determine whether the battery is damaged is by performing the voltage test. Multimeters are used to determine the voltage between the poles that are plus and minus of the battery. This test will reveal whether the battery is dead.

The receiver module may be the reason behind your key fobs not working after you’ve used your Peugeot 3008 a long time. The receiver module is responsible for receiving radio frequency signals transmitted by the key fobs, and sending them to car systems. If the receiver module is in a fault, it won’t be able to transmit commands to other modules inside the car.

Another common cause of an unusable key fob is moisture or sweat on the circuit board. This can cause short circuits which drain the battery and also disable the remote locking feature of the key fob. If this is the case you need to take your key fob in to a chip level service technician to repair it.

Water damage

If you dropped your key fob into the pool, threw it in the wash or left it in the rain for too long, water damage can be a major issue. Water is a fantastic conductor and can quickly cause short circuits on the circuit board. It can also cause corrosion to metal trace on the key fob as well as other components. A wet circuit board can cause the battery to discharge its charge.

If you have a spare key fob, use it to lock or unlock your Peugeot 3008 to rule out the possibility that a dead battery is the source of the problem. Interference signals can cause your key fob not to function properly. These interfere with the signal generated by the receiver module. These signals of interference are generated by a variety of sources such as radio transmitters within the close vicinity.

If you hear sloshing sounds emanating from your peugeot van key replacement 3008 while driving it could be caused by a blocked condensate drain for the evaporator. You can test this by blowing compressed air into the drain holes under your door. You can also use a flexible metal wire to wiggle drain holes to remove any dirt that has accumulated. The sound of sloshing can also indicate that there are air pockets within the coolant system.

A malfunctioning receiver module

The receiver module in a peugeot 3008 key programming 3008 key fob is responsible for sending the remote keyless system signal from the key fob to the car’s receiver. If this module is damaged, it may hinder the car’s ability to recognize the key fob. This issue can be caused by a dead battery or water damage. Or, interference from electronic devices operating on the same frequency. In these situations there may be a message saying “card not detected” may be displayed on the display.

There are many options to solve this issue. You may try replacing the battery or reprogramming your key fob. You may also be able to start the vehicle with a spare key. If the key fob isn’t working even after all these steps, it might have a chip faulty.

The best way to know if the key fob has an issue with its chip is to take it off and clean it up with a paper towel and rubbing alcohol. If the chip has gone bad it is recommended to purchase a new one. The FB Series enclosures come with the battery holder for coins that fits the most common types of key fob batteries. They can also be customized by using digital printing or CNC machined cutouts. If your key fob was exposed to dirty or salty tap water, your chip may be contaminated and need to be cleaned.

Faulty keyless entry system

If you receive the message “card not detected” This signifies that your car can’t receive signals from your key fob. This could be due to several reasons, such as an insufficient or dead battery. Most often, the issue can be solved by pressing the start button using the key fob. In some cases you may have to take the keyfob to an Peugeot dealer for repairs.

Checking the battery is the first step in fixing a Peugeot 207 New Key 3008 keyfob that doesn’t unlock or lock doors. Batteries are often the root of malfunctioning keys. However there are other factors that may be involved. They include worn buttons, water damage, receiver module issues and signal interference.

If you’ve recently experienced the Peugeot key fob exposed to clean tap water it’s best to remove the battery and dry the electronic components using paper towels. You can also use isopropyl Alcohol or a cleaner for this purpose. If the fob has been exposed to soap or salty water, it’s recommended to replace it.

If your key fob still not working, you can try to reset it by disconnection of the battery with 12 volts for approximately 15 minutes. Connect the negative cable and then the positive cable.