Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

After the glass has been removed, it’s a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is large, you may be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window repairs. As time passes, they may be affected by a variety of issues, including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it’s important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you’ll need open the window to get to the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and verify the an appropriate fit. If you’re happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it’s crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It’s a good thing that it’s simple to repair the loose uPVC window handle yourself. You’ll first need to close the window and do an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it’s important to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a fairly simple fix that can be done by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk’ as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze, it may be hinges at the fault. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Most households in the UK will have either top hung or side hung upvc window repairs windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process, but it’s simpler when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give advice.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, which can cause a gap between the frame and sash. If they are beyond repair, it might be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it’s possible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc window repair windows will continue to provide excellent insulation and security for your home. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. If you encounter any issues with your upvc window you should consult an expert as soon as you can.