How to Replace a Hyundai I10 Key Fob Battery

The Hyundai i10 has a stylish interior that rivals the Volkswagen UP and Citroen C1. It also competes with SEAT Ibiza. Its interior is more luxurious than its rivals such as the Citroen C1, Volkswagen UP and SEAT Ibiza.

Hyundai’s keyfob can do quite a bit for you. It can lock and unlock your car remotely. It also has a mechanical key that can be used in the event that the battery of your fob goes out.

Dead Coin Battery

The key fob is a fantastic invention that allows drivers to lock and open their vehicles without the need for an actual key in the ignition. It works by sending radio frequency signals which communicate with the computer onboard of the vehicle.

The battery inside the key fob is responsible for this signal and will eventually degrade and require replacement. Depending on your Hyundai model, you may or not get a warning when the battery is about to go out of. Keep a spare keyfob on you to change the battery as quickly as it wears.

The key fob must be reprogrammed to the car once the new battery has been installed. You can do this with an OBDII or hyundai veloster key fob Digital Key scanner, however it is more convenient to do in your Reno home. Follow the directions in the owner’s manual or search YouTube for “how to open and replace a Hyundai keyfob battery.” Be sure to take a picture of the old battery or note it down before you remove it.

After the key fob is reprogrammed, it should work again. If it doesn’t work you’ll have to visit an authorized dealer for a replacement or call locksmith. They’ll have the experience and tools to fix the issue.

Water Damage

A key fob is a useful piece of technology that can allow you to lock your car from the safety of your home, open the windows from the outside and even start your vehicle. It is not indestructible and will eventually get worn out by regular use. Fortunately, replacing the battery of a hyundai keyless entry i10 key fob battery is fairly simple and affordable.

It’s not unusual to drop your key fob in the water, a puddle, or even washing machine. It can be rescued if you act fast. A key fob that is wet can be harmful to electronics. It can cause corrosion, short circuits, and even failure.

The first thing to do is try to get as much water as you can. Flip the fob over and shake off any moisture that is observed. You can also make use of a hairdryer, or place it on a radiator to speed up drying. After you’ve removed all moisture you can, it’s worth placing the fob somewhere that is dry and warm where it will dry out for a few days.

Then, you can open the fob and remove the old battery. Most Hyundai key fobs with the i10 model use the same type of battery that’s used in a variety of quartz watches and are generally very simple to replace. Once you’ve replaced your battery, be sure to take a picture or make an outline of how the fob is placed before closing up the fob.

Poor Battery Contact

It’s possible that your keyfob’s battery is drained. This is a frequent issue. The remote will exhibit signs of trouble before it is completely destroyed. Check that the metal clips are not corroded and tight. If they do, clean them with a suitable battery cleaning solution and a wire brush. Then, ensure that you are using a button cell that has the same voltage, size and specification of the original.

This could be a sign that your alternator is not working correctly. The alternator is the component that charges your battery while you drive. An alternator that is not working properly will draw the battery out quickly and cause the warning light to come on.

You can determine if the Hyundai I10 Key Replacement Cost is affected by a quick voltage test. If the battery is in good condition there’s a chance that the problem is with the circuit board or a different component of the key fob. You can access the key fob by pressing an aluminum tab or button on either the back or front of the device. After removing the cover, insert the new CR2032 battery, and ensure that all the connections are connected.

Reprogramming

Hyundai offers keyless entry on several of its models, making the trip around Littleton, Parker, and Castle Rock, CO easier than ever. You can use remotes to start your car, unlock the doors, and then lock them. But it’s not impervious to destruction and a broken fob can cause problems. If your Hyundai key fob doesn’t work it might require reprogramming to work with your vehicle.

First, you must remove the battery. Typically the button cell battery is housed inside a tab made of plastic. When you open the tab, you must be sure that you replace the battery with one that has the same voltage and size as the original.

After the battery is replaced close the tab and replace the retaining clips. Then test the key fob to see whether it’s still working.

If the key fob still isn’t working, it could be time to consult a dealer or locksmith. A locksmith or dealer can make you a brand new remote and key, and program it so that it works with your vehicle. They will usually charge a fee for this, but it’s worth the investment if you need your hyundai transponder key key fob to continue to work. They can also help you find the best Hyundai key fob to meet your requirements.