UPVC Window Handle Replacement

Replacing a broken window handle is a relatively easy task and with the right tools it can be done quite quickly. However, it is essential to know the type of handle and its spindle’s length prior to purchasing a replacement.

Older uPVC window handles have a spur that extends and is locked over the cockspur wedge striker. These can be either right or left-handed and have to match when replacing.

What kind of lock and handle do I have?

There are many different types of window handles made of upvc and locks, each with its particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism works as intended. With time and regular use, the upvc handles on your windows can become damaged and worn out. This makes them less secure and less effective. In certain instances, they might even fall off completely. If you notice that your upvc replacement window handles window handles have fallen off, it’s essential to fix them as soon as possible. This will prevent possible break-ins, and keep your house secure.

It’s an easy task that virtually anyone can perform. With just a few tools and the proper knowledge, this is a simple procedure that should take no longer than a couple of minutes. To begin you must determine the type of handle and lock you have on your upvc window to help you find the perfect replacement window panes.

Inline Espagnolette Handles

They are typically located on the side of the glass window replacement. They have a flat design and have a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles come with a spindle running through the middle of the handle to the window frame in order to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have a distinctive, hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame and are not as secure as other kinds of window handles.

Handles that tilt and turn

As opposed to the other handles made of upvc the tilt and turn handles can both be rotated to open the windows and the handle can be tilted to the side to allow ventilation. In general, they feature a 7mm spindle on the side of the handle. They are available in both left and right-handed versions.

When buying replacement upvc handles It is crucial to measure the spindle’s length because not all handles are the same size. To determine the length of your handle made of upvc, simply drop something into the middle of the hole, and then measure the distance it travels before it reaches an obstruction. This is the longest spindle length that will fit your window.

What is the spindle?

uPVC window handles function similar as doors, with the user turning the handle to operate a latch inside the frame. This unlocks the window so it can be shut and opened. But, at times, handles can be damaged, especially when they are frequently used or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they are not operating correctly.

There are several different types of uPVC handles that are available, including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with the correct one.

You can determine the type of uPVC handle you have by taking a look at the base of the handle. There should be a “snap in cover over one screw that holds the handle’s base in the correct position. After removing this and you’ll be able to see the second screw that holds the base of the handle in position. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

Once you have removed your uPVC window handle, you will need to remove the old spindle from the locking mechanism. Take note of the length of the spindle. You’ll need purchase a new one that is the same length as the handle that was originally used and the locking device.

The spindle wears out and cannot operate the locking mechanism. This can be caused by corrosion, damage due to constant use or a loosening locking mechanism. If this occurs, you will need to replace both the window handle and locking mechanism to restore the full functionality cost of a window replacement your uPVC Windows.

How do I take off the old handle?

In the course of time and daily usage, window handles could become damaged or broken and when this happens, it is important to repair them as soon as you can to ensure the security of your home. It is simple to replace a worn or damaged handle. The task can be completed in under a minute without the need for any special tools.

The first step in removing the old handle is to remove the screw situated on the top of the handle base. After this screw is removed, the handle can be removed from the base section. A second screw will be located at the bottom of the handle. It can also be removed. After these two screws have been removed, the handle will be removed from the window’s base.

After removing the handle and fixing holes, align the holes of the new handle with the existing holes in the window frame. There may be a tiny cap or sticker on the new handle, so take off them if needed and then screw the handle in place. Once the handle is set, it is essential to check whether it functions by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles come with spindles that extend from the handle and slots into the multipoint locking mechanism of the frame of the window. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the frame’s outer or transom bar cross member in the window.

After you have installed the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle has been firmly fixed. Now that the handle is ready to use, simply open and close the window a few times to make sure that it functions properly and securely.

How do I install the new handle?

It’s not difficult to change the handle on your Upvc windows. The procedure is easy. All you require is a screwdriver and little bit of patience. First, ensure that the old handle is unlocked. Remove any screws that are visible. You could also replace them with screw caps. Once the handle is removed, you need to make a note of the length of the spindle that extends from the back of the handle. This is crucial as it will determine the kind of handle you’ll need to buy.

Espagnolette handles are the most commonly used kind of handle that is used on uPVC windows. They have a spindle which is connected to the handle and operates a locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. Over time and through regular use, espagnolette handles can be damaged or damaged and it is necessary to find an alternative.

Cadenza handles are a kind of uPVC handle that is usually used with tilt and turn windows. They have an extended blade that works the multipoint locking mechanism inside the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced with the same method as espagnolette handles however you must make sure that the new handle has a curved blade instead of flat ones.

Once you’ve decided on the correct handle to purchase You can simply line up the new handle with the existing screw holes, and then screw it in place. Then, you should put the screw covers on and test your new handle. This is done by shifting the handle from the locked to the unlocked position and then back to the locked position several times. If you encounter any issues, it might be worthwhile contacting a professional to determine if they can help resolve the problem. They will often be able to guide you on the best way to resolve the issue in a quick and efficient way.