Protect Your Pride And Joy With The ghost installation Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It’s discreet and doesn’t require additional key fobs in order to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence up to 20 presses long. This allows your vehicle to start.

Simple process to change the PIN code

With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are many different types of security products that are available for sale including tracking systems, alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. A tracking device can help you locate your car if it is stolen, but it will not stop the crime. An immobiliser, on the contrary is exactly what says on the tin: it disables your car’s engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.

The ghost immobiliser for sale device utilizes the buttons on your car to create a unique sequence that must be entered to allow the engine to begin. This can be done using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially useful when you need to give your car away to a valet service or parking, as the immobiliser will still be activated, but not disabled.

The Ghost is a very unique and innovative device which works in conjunction with the buttons in your vehicle instead of being a separate device. It is not only an effective deterrent to vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a how much is a ghost immobiliser more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your vehicle from key hacking and cloning. It also prevents ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also indestructible to jamming devices which is the most common method used by thieves to get around existing immobilisers.

The advantage of using CAN data is that it runs silently when compared to conventional systems. It isn’t detected by sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch ghost doesn’t produce LEDs, but instead utilizes the buttons on your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. This sequence can be extended 20 or more presses to provide additional security. The iPhone app allows only one connection, with a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It can be temporarily operated in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) which means you can hand your car how to become a ghost immobiliser installer a valet or service without needing to enter a code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the vehicle’s wiring and to the engine control unit (ECU). The device is able to intercept signals and stop your car from operating normally until you enter a customized code. The system can be activated and deactivated by using your smartphone’s app without the need for additional wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. It transmits a message to the ECU. If the correct code is sent, the car will start however, if the transponder is swapped with one from another vehicle the immobiliser cannot recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It protects you from key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief get it and not be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk as well as the steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you can use your car. It does this without additional hardware, like keys fobs. It can take up to 20 presses. It is also inaccessible to diagnostics equipment and doesn’t transmit radio frequency signals so thieves are not able to use sophisticated RF scanning or code grabbing techniques to detect that security systems have been installed.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, ghost installations is concealed within the vehicle, so it cannot be disabled or removed by thieves and is also harder to remove than a car alarm that requires disarming via the use of a button sequence. This makes it a perfect supplement How To Install Ghost Immobiliser a GPS tracker, which can help locate your vehicle after it has been taken.

Override of emergency PIN code

You do not have to look long on social media sites to find stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without the original key fobs.

The Ghost immobiliser has been designed to combat this and provide you with an extra layer of security in order to prevent your vehicle from being targeted by thieves. It works by creating a unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the center console. This unique PIN is entered along with the original key fob to stop the engine from beginning. The unique override pin can be found on the black card you will receive following installation. It is simple to remember since there are no LED indications.

The device is hidden in the vehicle’s wires, and doesn’t emit any radio signals, so it isn’t able to be detected by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it a fantastic alternative to a tracking device.

In contrast to other security systems which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to a separate alarm immobiliser or tracker. This should be specified prior to installation. They are also fully service/valet mode compatible and a good alternative to a tracker if you are you are taking your car in for repair at the dealer.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. It is easier than ever before to take your joy and pride with the availability of key cloning tools & door lock picks. We’ve developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been cloned.

It directly communicates with your car’s ECU (Engine Control Unit) through the data loop called CAN. It is completely silent since it doesn’t use radio frequencies or key fobs. It isn’t detected by diagnostics or any other hacking device. It also protects against adding an additional key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden inside your vehicle and is accessible via buttons on your steering wheel, center console, and door panels. A unique & changeable PIN code sequence of up to 20 digits has to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started without a PIN code being entered prior to. If you are driving away with the device armed the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run as normal. If you don’t enter your PIN code at this point, the indicator will keep flashing & will require a new PIN code for every attempt to start your car.