How to Replace a Kia Sportage Replacement Key

For a variety of Kia models keys, the key has the keyless entry system that is built into the key. The key functions like an remote control and can be exchanged by a Kia dealer.

Key fobs may stop working for a variety of reasons, such as batteries that are dead worn buttons or buttons, signal interference, water damage, and a defective receiver module. Here are some tips to assist you in getting your kia venga key sportage replacement key working again.

How to replace a remote key or a smartkey?

The battery in your Kia’s intelligent key will eventually have to be replaced, whether it’s a remote key, a push-to-start key or a standard metal key that does not contain an electronic transponder. This is particularly relevant if your car displays a message telling that the smart key or remote has low battery power.

It’s a simple process. To replace the battery in the key fob remove the mechanical key replacement kia from the slit on the back of the key fob. Then break the cover. Inside the key fob there will be an incredibly small screw that holds the battery in the correct position. Remove the old battery by removing the screw with the help of a small screwdriver. Install the new battery and close the gap on the key fob.

Test the key fob by pressing the lock or unlock buttons. It’s okay in case the doors lock and unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or when you need to go on errands around Brandon.

Note: Certain key fobs (transponder chip or smart keys) may need to have their programming done. This requires a specific programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) don’t require programming. If you want to change the programming of your key, it is necessary to write down the key code’s number on the tag for the key code.

How do you replace the battery?

If your Kia key fob isn’t responding when you press the lock or unlock button on the fob, it is a clear indication that the battery should be replaced. A battery that is not functioning properly can cause other issues, like the check engine light turning on or the engine not turning correctly. Fortunately, replacing the battery on the key fob is a simple DIY project that requires just some basic tools.

Before you begin be sure that your vehicle is turned off and that all doors are closed. Find the small metal or a plastic piece near the bottom of the key fob. Then, jiggle it until the key is released. Then, you can insert the key into the handle on the door of your driver to unlock your car.

To replace the key fob battery, take off the cover at the rear and use a plastic pry bar tool to remove the latch holding the black negative battery cable. Remove the old battery, and then position the new battery to ensure its “+” side faces you and the “-“, negative side is facing the fob’s electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.

Once the new battery has been installed then turn the key fob off and then turn it on in the ignition repeatedly until the door locks. Then, test your Kia key fob to determine if it is working properly again.

How do you replace a keyless keys

Depending on the model of the kia rio keyless entry Sportage, you may have the standard key fob, or a smart key. The difference is that the smart key is equipped with the small blade of a key tucked inside it, while the standard fob isn’t equipped with. Both kinds of key fobs contain batteries that will eventually have to be replaced. It’s an easy task that takes just two minutes.

Make sure to shut off your Kia and sit on a level, well-lit surface before you begin. Be aware that the fob contains small pieces that could be thrown off if you’re not careful.

The release button for the small size is located on the lower backside. It’s either a circular or rectangular slot. You can open the key fob by pressing the button.

Once the key fob is removed, you can remove the old battery. The new battery should be a CR-2032 and can be bought online or from your local auto parts store. When you are done, you should be able to lock or unlock your vehicle with your key fob – even if your engine isn’t running!

How do I replace a mechanical key

The kia sportage key fob key fob is a great feature that lets us lock and unlock our car at the click of an button. Like any other device it will encounter issues occasionally. There are methods to troubleshoot these issues and ensure that our key fobs are in good working order for the long run.

One of the most frequent problems is a low or dead battery. This can cause your device to stop working or operate intermittently. If this is what you are experiencing it is time to replace the battery a new one.

If this does not resolve the issue, you can use a standard flathead screwdriver to wedge the fob’s plastic casing open. Be sure not to damage any internal components or scratch the plastic. Once open, carefully remove the battery that was removed and replace it with a new one.

When the new battery is in, close and open the doors with the mechanical key (every kia venga replacement key fob comes with an emergency mechanical key that can fit into the slot). Test the key fob and verify that it’s working correctly. If the key fob isn’t working, call an authorized locksmith or dealer to help solve the problem. Make sure they cut you an emergency key that functions across all trunk and door cylinders to avoid future lockouts.