Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It is discreet and does not require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence up to 20 presses long. This will then allow your vehicle to start.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are looking to upgrade their security. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking system can help you locate your car if it is stolen however, it won’t prevent the crime. Immobilisers, however perform exactly as they say on the tin: they shut off your car’s engine so that it isn’t able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

Using the existing buttons in your car, the ghost 2 immobiliser near me device creates an exclusive sequence that has to be entered before the car’s engine can start. This can be accomplished by using the heater, window or indicator stalk buttons. In addition option, there is a mobile app which acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This feature is particularly useful when you need to give your car away for valet parking or servicing, as the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a standalone unit. It is not only an effective deterrent for vehicle theft, but it can be used on future vehicles you own. This makes it a better investment than a conventional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking and ECU swapping. It’s a weatherproof, tiny device that connects directly to your vehicle’s ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It is also resistant against jamming devices that are a popular technique that car thieves use to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch ghost doesn’t emit LED indicators and instead uses the buttons in your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can make this sequence up to 20 presses long for added security. The iPhone app only allows one connection, using an individual pairing code for the ghost immobiliser install. All communication between the two devices is secured.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to start when the correct PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can hand your car to valet or service without entering an entry code.

Tested for each vehicle

The Autowatch ghost immobiliser problems is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device is able to intercept signals and stop your car from operating normally until you enter a custom code. The system can be turned on or off via your smartphone’s app, without the need for additional wires.

Standard factory immobilisers for automobiles function through an electronic transponder in the key, which sends an electronic signal to the ECU. The car will start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser doesn’t recognise it. This enables the vehicle to start and be stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning and even key theft. The only way thieves could take your car is by physically towing it away and even then, they wouldn’t be capable of driving it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an individual, changeable PIN code sequence that must be entered before you can drive. This is done without the need for additional hardware, such as key fobs and can be as long as 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is concealed within the vehicle to ensure that it can’t be removed or disabled by thieves. It’s even more difficult to get rid of than a car alarm, which requires disarming with an action sequence. This makes it a fantastic addition to an GPS tracking device, which can be used to locate your vehicle after it’s stolen.

Emergency PIN code override

You do not have to go far on social media to find stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser was specifically designed to prevent this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel, and the centre console. This unique PIN has to be entered in conjunction with your original key fob to prevent the vehicle from starting. The unique override pin is located on a black card which you will receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the wiring of the vehicle and doesn’t emit radio signals. This means it can’t be detected by diagnostic software that can tell the security system you have installed. This makes it an excellent alternative to the tracking device.

Unlike other security systems, which rely on a relay in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also service/valet-mode compatible and a good alternative to a tracker if you are you have your car checked for repairs to an electrical issue at the dealers.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen from owners without keys. With the ease of access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your joy and pride. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been cloned or your car has been hijacked.

It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It’s completely quiet since it doesn’t utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, the centre console and door panels. A unique and reversible PIN code sequence of up to 20 digits has to be entered before you can start your Car Immobiliser Ghost.

This is the first aftermarket CAN-bus immobiliser that is being developed. It will prevent your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If you are driving away with the device armed the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate normally. If you do not enter your PIN in this moment the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.