double glazed windows repair Glazing Door Lock Repairs

Have your uPVC window or door mechanism deteriorated? Perhaps the handles on your uPVC windows or doors are not aligned properly or are difficult to operate.

It is essential that the double glazed window repairs glazed doors work smoothly, otherwise you’ll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

If a key is snapped off within a lock, it can be incredibly difficult. It can also be a security issue, as it may expose you to a burglar if the door does not lock. Fortunately, there are some simple fixes you can try to resolve the problem and get your door working properly once more.

First, remember to stay calm. If you panic, you could end up pushing the broken key piece further into the lock.

Spray WD-40, or another penetrating lubricant into the lock. This will allow the broken piece be removed more easily. You can also use the screwdriver to break up any pieces stuck. If you’re lucky enough to have a bit of the key hanging out, you can use a paperclip or some other metal object with a thin surface to grab it and pull it out. Both methods work, but you must be careful not to push the broken key piece further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don’t have any of them handy, you can make use of needle-nose pliers to bend and create hooks. Also, a pair tweezers is a good way to grip and remove the remaining piece of the key that was broken.

If you’re unable to pull the broken piece of key out, you can try using a lock de-icer. This is usually available at most hardware stores. It works by freezing any moisture or ice that may be inside the lock.

If none of these solutions work, it may be time to call a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also alter your double glazed window Repairs near me glazing door mechanisms to allow them to operate more easily. You can request an appointment online for a double glazing repairs-glazing repair double glazed window or call us to discuss your needs.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. A locksmith professional can repair the cylinder. A locksmith will have to tap the cylinder in order to fix it. This can be done using a hammer or other tool. However, the best method is to use a wire or a long match. Then, place the end of the match or wire in the keyway. The locksmith can then strike the lock in order to break it. This is far better than using a hammer that could cause damage to the lock.

Overheating is the primary cause of cylinder heads cracking. This can occur when the cylinder block and cylinder head are made from different metals, including cast iron and aluminum. When the various metals heat up and cool down at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion can be a reason for cylinder fractures. If the cylinder head and the block of the cylinder are not maintained properly, this could result in corrosion or rust, which may cause them to expand at a a higher rate than they ought to. In time, this could also cause cracks.

If your uPVC door or window lock is stiff or requires a lot of pressure to turn, it could be due to many things. This problem can be caused by a faulty locking mechanism or misalignment and also a worn out handle.

Fortunately it’s a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith will usually be able to resolve the issue within an hour of arriving at your property. Depending on your needs they can change the locking mechanism, change the window handles, and also change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection from burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that become less effective with time and use, so it’s not a surprise that they can break. It isn’t easy to determine the reason behind the problem and repair it correctly.

The issue could be related to the locking mechanism inside or the latch, fixing the broken handle will improve your uPVC double glazing door’s security and allow you to stop the draughts. It is costly to repair or replace your handle if it is not done correctly and can also damage the frame and the lock of your door.

With the window open and the window open, loosen the screw that secures the handle using a screwdriver. The screw should be on the inside face of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. It is important to not be able to replace any internal parts of the handle like the plates and levers on either side. Ideally, keep them in the same order so that you can replace them again in the event of a need.

Then, turn the handle so it’s at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle with a second screwdriver. Once the screw is free, you can take the handle off and take out the broken spindle. Replace it with a new one, making sure it’s the same length as the previous one (you can typically find these on the internet or at hardware stores) and securely screw it into the correct position. Be careful not to overtighten as this could damage the handle or the window frame.

Close the handle and try it. Hopefully, it will work smoothly and you’ll be able open your window once more.

Make sure to check that your uPVC window is shut correctly while you’re working with the handle. If they aren’t closing correctly, you could encounter damp or draughts inside your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is particularly typical in uPVC tilt and turn windows. These windows require a handle that operates an locking device within the frame of the window. The handle is attached to a rod in the centre that triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism fails to open after the handle has been turned, it is most likely the spindle has been damaged. This can be a problem that is frustrating.

There are solutions to this issue. A skilled locksmith can quickly and efficiently solve the issue. They can disassemble the window handle by using a tool that removes the wheel portion of the mechanism, where the spindle is. This can be done with no damage to the handle or window frame.

Once the wheel has been removed, the technician can examine the spindle to determine what has caused it to break. This involves breaking down the spindle into its component components and carefully observing their general condition, as well as any specific areas of damage or excessive wear. This procedure is typically performed by technicians in a clean environment.

Next, clean the damaged spindle. This will help remove any dirt or other debris that may be obstructing it from functioning normally. The spindle can be replaced or repaired. If the technician is replacing the spindle the dowel can be used that is the same size to the original. The technician will then make holes in the same way into both pieces. This will ensure that the new spindle has a precise fit with the handle.

If the spindle is damaged and cannot be repaired it may need to be replaced entirely. Home centers sell generic replacements but If the style of your window is unique then it is necessary to contact a wood worker or cabinet maker who can duplicate the exact component for you. Once the new spindle is in place it can be positioned to the handle by lining up the screw holes on the handle with the frame’s existing screws. Once the handle is set, you are able to operate your uPVC windows.