Sliding Patio Doors Repair

Patio doors that slide open are an excellent way to take advantage of your outdoor space, however they can become difficult to open and close. This could be due to a number of issues, such as dirty tracks or rollers that are not aligned properly.

Clean the track first and Lubricating the rollers. You can also re-align the rollers using adjustment holes located on the bottom side of the movable door panel.

Track that is damaged or dirty

A sliding door that does not slide as it should can be due to an unclean or damaged track. Over time, dirt and grit, as well as rust can build up blocking the track from moving smoothly. A gentle detergent and brush will suffice. This task should be performed regularly to ensure a smooth operation and avoid costly repairs in the future.

A leaky door can be a common issue. It needs immediate attention to prevent water damage, structural deterioration and the growth of mold. The problem is often caused by worn weather stripping and misaligned doors. This can be fixed by replacing the weather stripping and aligning the doors.

Another common problem that can be solved with a bit of DIY work is rollers that jump off their tracks. This can be a difficult task, so ask a friend to assist you. To move the rollers around, stand inside the house and lean one of the panels toward you. To stop the panel from falling, put it on sawhorses once it’s been lifted off the bottom track. Then loosen the screws that hold each roller in place, and take them off with the help of a screwdriver. You can now remove any dirt that’s stuck between the wheel and the tracks. Clean each wheel using denatured alcohol on a rag. Reposition the wheels on their tracks and attach them once more.

It may be possible to straighten bent track sections with a rubber mallet, and a piece of wood. If the bent portion is located near hinges or has the potential to cause further damage, it’s recommended to call in an expert.

Rollers that are not aligned

If your sliding door is sliding poorly it’s because the roller wheels are not aligned with the track. The wheels could be dirty, rusted, or their bearings are worn out. This friction causes the door to become snagged and grind when it is opened or closed. It also makes squeaking noises.

This is a straightforward solution. The wheels are on a bracket which can be adjusted, which means you don’t need to take off the door. Find the adjustment holes (usually on the opposite side of the frame) and use a screwdriver to rotate the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise movement lowers it. Continue adjusting until the door moves smoothly and quietly when open or closed.

It is essential to adjust the wheel prior making adjustments to your latch. In order for the lock to function properly the latch hooks have to be aligned with the strike plate. If you don’t, the latch could accidentally open or close when you’re out of the room.

A sliding patio door is an investment. Keeping them in good condition will keep your family safe. By addressing common problems like faulty tracks, rollers and handles, you can prevent costly repairs in the near future. Contact us for more information about patio door repair near me doors. We can assist you in keeping your sliding patio doors in great condition by assessing your repairs needed. Our experts can also help with any replacement parts you might require.

Loose or Damaged Door Frame

Sliding patios doors are an excellent addition to any home. They provide a convenient and attractive alternative to swing-open or hinged patio door options. However, like any other hardware, they may experience a variety of problems over time. Many of these problems are fixable with a bit of DIY skills.

A gap in the frame is a typical issue with sliding patio doors. This can be caused by many factors, such as misaligned track or rollers or a damaged door track or bent door frame. In most cases, the problem can be easily fixed by taking the doors out and reconnecting the track. It is crucial to be cautious not to harm either the frame or track.

In certain instances it might be necessary to replace the entire track. This is easily done with an universal replacement kit that is available at all major hardware stores. These kits are easy to install and will have your door functioning properly again in no time.

It is important to inspect the frame of your sliding door and hardware for signs of wear and tear, such as loose screws or bolts. These are usually tightened using a screwdriver or wrench which makes this a simple and effective DIY patio door maintenance step. Additionally, it is important to lubricate your rollers and tracks to ensure smooth operation and prevent premature wear.

For many homeowners the patio doors repair doors are the main access to their backyard and outdoor living space. In order to maintain security and comfort in the home, it is essential that they function properly. By taking the time to implement these simple DIY maintenance steps homeowners can extend the life span of their sliding patio doors and reduce the cost of repairs or replacements.

Handle is not working properly

Sliding patio doors are a great way to access your backyard and also enter your home, however they can be difficult to operate if they are misaligned or damaged. A damaged handle could cause the door to not shut or open properly. Fixing a loose handle could be done at home.

In many instances, a loose grip is a result of screws that have fallen out of the backplate. To fix this issue just tighten the two screws on the inside of the handle with a screwdriver. If the handle remains loose it could indicate that the threads have worn away and need to be replaced.

A broken latch could also be the cause. It is more likely that the latch will break if it is made of metal as opposed to plastic. If the latch isn’t turning or catching, you should try oiling it first to see if it helps. If this doesn’t work, you may need to replace the lock.

The handle, in turn, may become difficult to operate in the event that it is broken or cracked. If this happens it is necessary to replace it with a new handle that matches the style of your sliding patio door.

Whether your patio door handle repair near me doors are old and outdated or new, Feldco can help you get them back on the right track. We offer a broad selection of high-quality patio doors in various sizes and styles. For more information about our doors, contact us now! We offer services to Southern California homeowners, including Ventura County and Orange County.

Afflicted Weatherstripping

It’s time to upgrade your weather stripping if notice light coming from windows and doors or sense a draft pulsing towards the door or window. The strips form a tight seal that blocks unwanted insects, air, and water from entering your home. It also helps keep your conditioned and heated air in, saving you money on your energy bills all year long.

It could have lost its positive seal, bouncy, due to age. This can be identified by taking a dollar note and running it under the seal along the top of the door frame and bottom of the door jamb where the two overlap. If the dollar bill slides effortlessly between the seal and the door, it’s time to replace the weather stripping.

If you replace only the worn-out part of the weather stripping, this could cause future problems with the seal. It’s far more effective to replace the entire stripping to ensure that you can rest assured knowing your door is properly sealed again.

For a simple DIY project follow our weather stripping project guide to remove the old weather stripping and then apply the right material to your sliding patio door and door frame to create a durable, tight seal. This is a great opportunity to save money on your energy bills and fix your sliding patio door. Don’t wait until it’s too late. Your wallet and home will thank you.