How to Program a Subaru Replacement Key

If you lose your key fob, or it stops working it will be charged by the dealer you to create the new one. Locksmiths can do it for less.

This is a typical issue. The first step is to check the battery. Replace it with a new one that is the same type, size and voltage as the original.

How to Replace your Keys

If your Subaru comes with a smart key or a transponder keys, you will need to visit the dealer for programming. If your Subaru is equipped with a non-transponder metal key, you can do it yourself using some effort and a few tools most people will already have at hand.

First first, open the key fob’s exterior case using a metal key and a flat-head screwdriver. Press the small tab located in the seam between front and back of key fob’s enclosure. This will open the smaller, interior casing that houses the battery. Use the screwdriver to open this casing, and locate the new 2025 battery inside. Remove the old battery and replace it with the new one. Join the two sides back together.

Now, get into your car and close all the doors, except for the driver’s door. Turn your key to the first position, where the electrical systems start to turn on, but the engine remains off, then back again to the off position. You will hear a sound if you repeat this 10 times in rapid succession. After that you will have 45 seconds to program that 8-digit serial number into the computer of your vehicle using the lock and unlock buttons on the driver’s side door. The dome lights will flash to confirm of the successful programming.

Remote Keys

A remote key is a tiny remote control that is used to unlock and start the engine of your car. It can also be used to operate the alarm system, lock or unlock the doors and open the trunk. It can be programmed with an electronic key fob, or the mySubaru App. In certain states, you might need to purchase an ignition key and program it to meet the requirements of laws that prohibit cars from being left in motion when they are they are parked.

It is not always affordable. If you’re looking for a better alternative locksmith, there are professional locksmiths who can come to your location and offer the remote start services that you’re looking for. The disadvantage of using locksmiths is that their prices are typically higher than those provided by the dealership.

Before you hire a locksmith that offers remote start services that are appropriate for your vehicle, make sure they’re licensed and insured. You should also ensure they have the right equipment to perform the job. This will ensure that the locksmith can program your keys correctly. If they’re unable to, it could lead to problems in the future when you try to start your car or lock yourself out of it. Be sure to verify that the emergency key they cut for you is working on the door cylinders as well as the trunk to avoid any problems in the future.

Transponder Keys

subaru key car cars are equipped with a variety of useful technology features to keep you connected. Some of these include STARLINK Multimedia, which allows you to connect your smartphone with a hands-free headset while listening to music or watching the news and a built-in Wi-Fi hotspot that allows you to stream content; and a navigation system with Google maps that indicate where you’re going and help you reach your destination quickly.

The key fobs for subaru key fob upgrade Forester Outback Crosstrek WRX and STI have a small chip that transmits a message to the engine computer in your vehicle whenever you use them to unlock or start it. The chip is programmed using an unique code that is associated with the specific vehicle.

If you’ve lost your key fob, or if it’s not functioning properly, bring it to an authorized locksmith or dealer that has an authorization code to reprogram the chip for your subaru key. They’ll also make you a new key that works in both trunk and door locks, allowing you to still access your vehicle even if the battery in your key is dead.

If you’re visiting a dealership or locksmith, be sure to tell them your car’s VIN (Vehicle ID Number) and the year. The VIN is found on the dashboard and in a prominent location. It will help the locksmith or dealership verify that they have the proper key fob and key to program your Subaru.

Keyless Entry

You can start your Subaru remotely if you have a Subaru impreza key (https://www.bitsdujour.com/profiles/npi5Bb) with keyless entry. If you’re planning to go for a hike and don’t want to carry your keys, or you want to warm up your engine prior to driving through snow, this can be a great help.

This feature is only available if you have an intelligent fob or replacement subaru key key. The procedure for programming it is simple and quick. You’ll have to know the 8-digit number on your key fob. If you are unable to remember it, make a note of it.

Once you have set up your pin code, you can unlock the car doors by pressing your key fob the trunk release or the liftgate locks. You can put your keys in your car when you go on an excursion, or take your children out to play. When you return, you can enter the five-digit code to unlock and get into the vehicle.

If you’re interested in adding keyless entry to your car there are kits that you can install yourself. However it is recommended to hire a professional to ensure that the system is installed properly and works as intended.