how to program saab 9-3 key fob to Replace the replacement key for saab 93 Key Battery For the saab milton keynes 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer support using the handheld computer known as Tech-2. Then a new key and transponder must be purchased and then programmed into the car.

Rotate your keys to prevent one from wearing out quicker than the next. This will also keep your keys in top condition.

Replacement Case

The new key fobs aren’t like the older Saab 9-3 Key keys. They are equipped with electronics which make it hard to copy. This has made car theft significantly more difficult than 20 years ago. It also makes it more costly to replace keys that were lost.

Saab 9-3 owners must have two working keys. If one is lost, it costs a fortune to get another one for the car because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 to complete this.

There are ways to reduce the high cost. Some parts retailers will find the code from an extra key (usually the same one that opens the doors and switches the ignition) and cut a new key blade out of metal for only a fraction of the dealer’s cost. The key must be the exact same as the original in order for it to function in your vehicle.

You can also change the case yourself by following these steps. You’ll require a flathead screwdriver and some patience. Using the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. Once the case is open, remove the electronics and place them inside the new case. Be sure to put the correct badge and key back into the case, as well.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd shows how to replace the battery of the remote fob with only four steps. This tutorial is suitable for any modern saab key fob, however the procedure might differ slightly.

The button is normally located close to the Saab logo on the back of the fob. It’s usually next to the saab replacement key logo on the back of the fob. Next use the flathead screwdriver to insert into the tiny hole in this button. This should be enough to allow you to open the fob case so that you can replace the battery.

Once the new CR1632 battery is in place it is possible to reassemble the remote key fob. You can then program it to your car. The whole process should not exceed an hour. It is a very simple process that does not require any special tools.

If you lose your key, the procedure will be more complicated however it can be accomplished. The dealer must first read the VIN of the vehicle, and then purchase an additional TWICE module and key blade that is matched to the unique code. The dealer will then have to program the key using MDI which is a new software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it’s got an internal battery. They have a limited life span and will eventually fail. This is a problem that happens with all cars and the good news is that you can change the batteries on most key fobs and not have to replace the entire case. You can purchase fobs replacements on Amazon that come with all the electronics already installed, so you’ll be able to simply open the case and replace the batteries in the original case. It is important to remember that you’ll need to remove the emergency key first, and you can accomplish this by inserting an incredibly small screwdriver with a flat head into the slot that is located in the middle of the case. The screwdriver should be moved around the case until it will split open, making it much easier to take it out.

When you’re ready to replace your keys, ensure you have spare keys, because this can cut down your total cost by a substantial amount. If you have an extra key, you can ask the dealer to cut the key and program it for your car. This is a lot less expensive than purchasing a new fob.

If you don’t have a spare one, you can add an additional key to your car, but this will require a lot of research and effort. Adding a second key costs about a few hundred dollars and it also requires the programming of the car’s computer. Professionals can accomplish this but it’s not a cheap option.

Replacement Ignition

The new SAAB 9-3 features a more sophisticated alarm system that is based on a key code. This means that in the event that you lose your only working key, replacing it with another one could be very expensive since the car has to have a special computer module installed, and it also must be specially programmed to accept an additional key. The majority of locksmiths aren’t able to do this and a dealer will charge several hundreds of dollars just to program the new key!

Dealers will charge you a premium to replace your car’s computer (also known as the CIM or SAAB twice) when you lose your only functioning key. Instead we can reprogramme the EEPROM in your current car computer to make it ready for a new key, saving you over 50% of what you’ll be charged at a dealership.

If you have owned a SAAB 9-3 quite a while you’re aware that the ignition keys are not very durable. They can be extremely sticky, and the buttons can fall off occasionally and you should think about purchasing a new one if yours isn’t working properly. It’s good to know that replacing the ignition key isn’t as difficult as it seems and can be done quickly using the proper tools.