How to Change a Subaru Spare Key

If you have lost your Subaru car key, call a locksmith. They can usually cut new subaru key fob keys for you much less expensively than the dealer.

Fob remote “push to start” intelligent keys or a plain metal key are the two main kinds of Subaru car keys. The Fob key will need to be reprogrammed.

Keyless Entry System

Key fobs allow you to lock or unlock your Subaru from a distance. You can even open the trunk or lift gate of your vehicle. These remotes make use of a keypad in your car to connect to your vehicle’s computer.

subaru key programmer models offer a little known feature dubbed PIN Code Access. This lets you utilize a personal sequence of numbers to open and start your vehicle. Read the owner’s manual to learn how to utilize this feature if you own a subaru keys replacements Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop working, there’s an excellent possibility that the battery in the key fob is dead. You can test the battery life of your key fob using an instrument that is portable or a multimeter you can find in your garage.

The next step is to remove the key fob from its case and inspect the circuit board that controls the transmitter. There will be one or two 8-digit sets. Write down the first set so that you can recall it. Once you’ve finished take the key fob back together and you’ll be ready to program it at home. The procedure to do this will vary based on the type and year of your vehicle, but it’s usually simple enough to do by yourself.

Key Fobs

subaru impreza key replacement‘s newest models are all equipped with key fobs that not just unlock doors and activate your lights, lock your gas cap, and even start your vehicle. This feature is especially useful if found yourself at the gas station and your car won’t even start because the battery inside the key fob is dead.

It’s likely that your Subaru’s key fob, whether it’s old or new, can be easily replaced. It’s important to remember that newer models with an advanced level of technological sophistication may require an outing to the dealer. However, with a little time and effort, you’ll get your new key fob ready to go at home.

Begin by looking at the circuit board of the transmitter in your key fob (instructions for opening the case must be included in your owner’s handbook). It should have two or three serial numbers, each one of which is 8 digits long. Keep the first set of numbers for later reference.

Then, get into your driver’s seat, and close all doors. Turn the key to start your vehicle and then shut it off after ten turns. Press the lock button on the key fob, then open the door to verify that all doors are functioning properly. Close the door, then take the key off. The chime should be heard from your vehicle and indicate that the key fob is programmed.

Ignition System

The battery in your key may be dead if your Subaru keys aren’t working as they should. If you know how, you could replace the key fob’s battery yourself. The replacement Subaru Key cost of the battery is affordable and simple to locate. If the key fob doesn’t respond to your commands It could be a different issue. To get a spare, it’s best to visit a dealer. They’ll guarantee that the key is genuine Subaru key that’s under warranty. It will also be programmed to your vehicle. This is much simpler and more secure than purchasing an aftermarket one from a company online.

The dealer is also able to cut keys for you provided you provide them with your VIN number and as evidence of ownership. They’ll use this information to create a code for the new key to ensure that it will be recognized by your immobilizer. This is a more complicated process than cutting a key, and the dealer will charge more for it.

Once the new key is programmed, it is possible to switch it with your working key. It will take only five seconds to insert the new key, so be sure to keep your working keys close at the ready. You can take the key off after the security light has stopped flashing, and then test it.

Battery Replacement

One of the most important features that makes Subaru fobs useful is their ability to turn on your car’s power windows and sunroof at the touch of a button. The battery in your Subaru fob wasn’t made to last forever, and will need to be replaced at some point. This short guide from Capitol Subaru will help you to replace the battery yourself.

You’ll first need to find the small crack that is the gap between the front and back of your keyfob. You can cut this seam with a flathead screwdriver and reveal the small compartment that houses the battery. Remove the battery that was in it, and then replace it with a fresh one, making sure it is facing the right side upwards. Once you have assembled everything is in place, you can use your new key fob to lock the vehicle, unlocking it, and then starting your vehicle.

Always have a spare set of keys, especially if one is damaged or lost. You can buy a new key from your local dealership or get it cut by a locksmith. It is essential that your key fob functions properly as soon you can so that you can safely drive.