In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace

An in-wall fireplace gives an elegant and polished look without the cost of mantles. It is among the most simple electric fireplaces to set up.

There are a few aspects to think about prior to purchasing an in-wall fireplace. To get the most value from your investment, consider these helpful tips:.

Height

Although it might seem like something that is easy, figuring out the height of your new fireplace is one of the most important decisions you make. This is because the height of your fireplace will affect everything from how it will fit in a room to how well it is visible. Having your fireplace raised to high could make it look unnatural and detract from the aesthetics of the piece. A fireplace that is too low could look drab in the wall space.

Luckily electric fireplaces are adaptable enough to be installed at a variety of heights. The majority of people install their fireplaces from a sitting position at eye level. This usually requires a height of 40-42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces beneath their TVs. This is an attractive alternative.

The height of your fireplace is contingent on a number of factors such as the dimensions and length of the wall you want to put it on. The bigger a room larger, the more spacious it can be which could mean that you are able to fit an even larger fireplace. The length of the wall is also crucial since a wall that is larger can accommodate a bigger fireplace.

Another important factor to consider is how you plan to use your fireplace. If you are planning to use it solely to decorate your home, a lower height is best. If you intend to heat your home using it, you’ll need to make sure that the fireplace is tall enough to satisfy local codes and safety standards.

The right height for your fireplace will help to ensure that it’s in keeping with the decor of the room and is simple to work on when cleaning or filling it. If you’re unsure of the height to go with, you can always reach out to an expert fireplace installer for assistance. They can recommend the ideal height for your fireplace according to their experience and the design of your home’s layout.

Depth

The depth of a fireplace is essential to know if you plan to install it in a recessed location. If you’re planning to cut into the wall, ensure that you have enough room to accommodate your fireplace’s interior design (the space for the smoke shelf above the firebox as well as the flue that is atop the roof). You should also consider the space available for Lynn Bolvin the surround, and whether you would like a fireplace mantle.

Many of the newer electric models of fireplaces have a depth that is nearly concealed, creating the appearance of a “built-in” look. The Panorama BI-Deep series is a great example of this kind of electric fireplace that is wall-mounted. The model has a 5.8-inch depth that lets the viewer see the flames and ember bed instead of the frame of the fireplace. The media package includes driftwood logs with natural colors white pebbles, as well as clear glass crystals to add a luster to the embers and reflect the flames.

Wall-mounted gas fireplaces are also available in deep and shallow versions. When deciding on the depth of your fireplace, it is essential to remember that these fireplaces work as a supplemental heat source and lynnbolvin [Lynnbolvin.top] must be properly vented by an experienced professional. When determining the size of gas fireplaces it is important to take into consideration the length of the vent pipe and the size of the chimney.

If you decide to go with a surface mount or a recess-mounted installation, it is crucial to read and follow the manufacturer’s instructions carefully when installing your fireplace. In most instances, a professional installation is advised. It is also good to have an extra person on hand when installing a gas fireplace.

Installing a fireplace in the wall of your home can be an excellent way to increase its value and add ambiance to your living spaces. It also can help reduce the cost of heating. Furthermore, it’s an ideal option if are unable to fit traditional fireplaces in your home because of the space restrictions or the location of an existing chimney.

Surface Mount

Surface mounts are a great option if you don’t wish to or aren’t able to cut into the wall to install an electric fireplace. They also give it a sleek, built-in look. Some models, like the Allusion line of electric fireplaces, can be installed partially recessed into a wall without compromising the heat output.

To begin the installation process, identify where you want your fireplace to be placed and mark it with a pencil on the wall where the bracket will be erected. Use a stud finder to locate the studs within that area and make sure every mounting bracket is placed in the vicinity of one or more studs to ensure stability. If a stud cannot be reached or is not suitable for your fireplace, use drywall anchors as a support.

Once you’ve determined the location of the brackets to be mounted then use a drill to screw them into the wall, making sure they are aligned with the studs. If possible, attach each bracket to a stud for security and strength, but you could also use plastic anchors when needed. After the mounting brackets are installed, lift your fireplace and hang it on the wall bracket. After it’s secured, you can check the position of your fireplace to ensure that it is level and not crooked in the opening.

Before proceeding with the installation, plug in your fireplace and check that all the features are functioning correctly – turn on the flame and ignite the flames, play around with heat, ember bed lights and so on. Once you are happy with the results it is time to put in the floating mantel.

Depending on the model of your fireplace, you’ll need to connect its wire connection to the appliance wire connector Lynnbolvin.Top at the lower part of the mantel. Or if the fireplace has hooks or slots on the back connect them to the slots on the wall mounting brackets. After you’ve completed this process you should consult your fireplace’s user manual for directions on how to remove the front glass panel from the opening and replace it.

After you’ve removed the front panel of your fireplace and installed it into the opening, follow your instructions in the manual to complete the install by replacing the glass front and adjusting the height as required. If your fireplace is equipped with ember bed media, place it across the top grille to create a natural look. Then, secure it with the included screws.

Plug-In

In contrast to traditional fireplaces that burn wood, electric fireplaces don’t require chimneys or vents. They plug into a standard outlet that can provide supplemental heating for rooms that can be that are up 400 square feet in size. You can also adjust the atmosphere with different settings for flame and heat. Some models feature LED lighting effects to highlight the fire and embers. Some models have an upper grille grate that conceals manual controls but pops open to reveal buttons to select the setting you prefer.

Electric fire places with plug-ins can be installed directly on the wall or recessed to create the appearance of a built-in. They are generally simpler to install than mantel fireplaces. Some models come with a pedestal to allow you to put the fireplace on flat surfaces like a buffet or dresser. Included is an remote control, mounting hardware and the log set. Electric fireplaces can have both heat and flame options, which can be turned off to provide a warm and cozy atmosphere.

Some models have adjustable privacy glass that you can instantly change from completely see-through to partially transparent. These types are ideal for walls that separate entertainment areas like dining and living rooms. These models are ideal in bedrooms, where an fireplace is a cost-effective way to warm up a room and maintain privacy.

While plug-in electric fireplaces don’t need to be hardwired like traditional fireplaces, they must be positioned on a wall that is at least stud-free and capable of supporting the weight of the fireplace. Some models come with a kit to make this process easier, Lynn Bolvin (moved here) including an electrical power cord that is pre-wired and an specialized mounting bracket. This kit is suitable for drywall installation or concrete installation.

If you choose to install your electric fireplace in a wall ensure that it is located near an outlet. Depending on the model, plug-in electric fireplaces can be connected to outlets that are on the same circuit, or a separate one for your electric fireplace. It is recommended to use a separate circuit to ensure that nothing else in the home will be operating at the same voltage and potentially trip your breakers.