Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows hinges for replacement isn’t as difficult as you think. It is essential to verify that the arrow on the hinges are facing the right way and also the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are many different kinds of hinges to pick from, each with unique features. This article will discuss the most common kinds of uPVC window hinges and the advantages they offer.

Egress/Easy Clean Hinge

They are an excellent choice for replacing or upgrading a fire escape safety window since they open at a full 90-degree angle. They can be disengaged to an easy-clean position, allowing you to access the outside of windows without the need to climb ladders or lean at risky angles.

These heavy duty egress hinges are manufactured by Yale, one of the most well-known and reliable home security brands available today. These hinges are suitable for any type of uPVC side-hung windows. They can be moved into the easy-clean position by pressing a small button and then sliding the window sash over to one side. When the window is closed, the sash will revert to its original position.

They are available in 13mm and 17mm stack heights. Depending on the size of your window, we suggest using our Egress Selection Guide to determine the best product for your needs.

These hinges can be used with standard side-hung frames made of aluminum or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the risk of a mishap during high winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is simple to use and doesn’t have any buttons or catches. It offers a convenient and safe option for emergency exits and cleaning. Firstly, open the window to the egress (full opening) position, then press the hinge retaining clip that is located on the inside of the bottom corner. This will open the bottom and top catches and allow you to slide the sash into an easy-clean position. Once you are in the clean position, close the window to reset the hinges to their original position.

Fire-Escape Hinge

Fire Escape Hinges, often known as “Easy Clean” hinges are used to replace windows that open sideways for escape (fire safety) reasons. These kinds of hinges for windows open wider and faster than conventional hinges to provide a large clear opening to escape in the case of a fire. This kind of hinge is required in any habitable room with a window as required by building regulations.

The windows have an elongated friction that permits the windows to open up to 90 degrees. They also allow the opening sash slide across the glass when opened and allows for easy cleaning without the need to climb ladders. The hinges do not have buttons or catches, and are operated by a simple, secure lever that is accessible from the inside of the home.

The hinges are produced in the UK by Cotswold and come complete with a child safety restraint for use throughout the day which can be turned off with a hidden button, giving you peace of mind that your children won’t accidentally open the fix door hinge too far. They are available in 13mm or 17mm stack heights.

To purchase these hinges, take a measurement of the length of your current side-hung window hinge that fixes to the frame (see the guidelines for measuring your upvc window hinges). Choose the right size hinge below.

Please note that this measurement is taken from the hinge’s part that attaches to the frame, not the sash. The actual length of the hinge could be shorter or longer depending on how your windows were made in the past. Also, when choosing the size of your hinge, most windows made of upvc will have a 13mm stack height. However, should your old frame has 17mm, then select the option that fits this. You can also install the 4mm packer to make up the difference. All hinges are supplied with two hands (1 left and one right). Screws are not included in the hinges. If required, these can be purchased separately. Our window repair screws made of upvc are recommended. They are specifically made to improve the performance of your hinges that allow them to run efficiently for a longer. They have a lower friction design and a better weather seal, with a brand new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These restricted child safety friction hinges help to overcome this issue and are a great solution when ventilation is needed but access for cleaning or escape in the event of fire isn’t possible. They limit the number of times you can opening the sash, and permit the override of this restriction by pressing the button. They work with both top and side hung windows and come in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction hinge combines the features of a standard restrictor and an escape hinge to offer an effective and simple way to meet building regulations. It is suitable for upvc Door Hinge both side hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It is available in two pieces with one hinge being the one that is restricted for egress, and the other being the unrestricted. This allows one to be placed at the bottom, while the other is installed on top.

These uPVC hinges are specifically designed to be used on windows that cannot be fully opened, like a child’s bedroom. The mechanism restricts the distance the sash opens to an appropriate height of 100mm and then re-engages when the window is closed.

These uPVC friction-type double glazed hinges can be used with all types of windows. They are particularly suitable for windows that are hard to reach, such as those in three-storey apartments or those which would require the use of a ladder. They can be paired with our range of security features like hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.

It is crucial to take measurements of your existing window hinge to ensure that you get replacements that are the same size. The easiest way to do this is to look at the hinge in the image gallery and working out the best place for it to be positioned. Top-hung hinges are limited on both sides and the side hung hinges can only be used to one side.

Standard Hinge

A standard hinge uses metal-to-metal contact and no extra components to reduce friction. It is available in a variety of finishes and also comes with a fire rating. To quickly determine the radius of hinges, lay them out flat and align a quarter and dime in two corners. If the quarter fits better then the corner should be round to 5/8 inches.

The right hinge can make or break the appearance of your door repair hinge. Matching the design and style of the hinges to your fix loose door hinge will create an attractive and cohesive appearance.