Protect Your Pride And Joy With The ghost immobiliser and tracker Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. This system is discrete and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be altered up to 20 times. This then authorizes the startup of your vehicle.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a variety of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your car. A tracking device can assist you in locating your vehicle in the event of it being stolen, but it will not stop the crime. Immobilisers, in contrast perform exactly as they say on the tin – they disable your car’s motor to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to generate a unique sequence which must be entered to allow the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. In addition to this, there is also an app on mobile that acts as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This option is particularly beneficial if you have to surrender your car for valet parking or servicing, as the immobiliser is activated and not disabled.

The Ghost is a unique and ingenious device that works in conjunction with buttons of your car rather than being a standalone unit. It’s not just an effective deterrent for vehicle theft however, it can also be used on any future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that protects your car from key cloning and hacking. It also prevents ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices which is the most common method used by car thieves to circumvent existing immobilisers.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It isn’t detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The autowatch ghost installers birmingham, this content, ghost does not produce LED indicators and instead uses the buttons in your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, using a unique pairing code for the ghost ii immobiliser. All communication between the two devices is secured.

The Ghost also prevents car thieves from adding a new key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start if the correct PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit) and, therefore, you can hand your car to valet or service without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the vehicle’s wiring and also to the engine control unit (ECU). The device intercepts signals to prevent your car from starting normally until you enter a customized code. The system can be activated or deactivated through your smartphone’s application without the need for wires.

The standard factory immobilisers function with a transponder which is integrated into the key. This sends a message to the ECU. The car will start if the correct code is sent. However, if the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be started and stolen. A South African company that is at the forefront of car security systems technology developed the Ghost immobiliser. It shields your vehicle from key cloning, hacking and even key theft. The only way that a burglar could steal your vehicle is physically towing it away, and even then they wouldn’t be able to drive it.

Ghost makes use of buttons on your vehicle, like the indicator stalk, steering wheel, as well as the door panels, to create a unique PIN code that must be entered to use your vehicle. This is done without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing technologies to detect that the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be disabled or removed by thieves. It’s also harder to remove than a car alarm that requires disarming using an action sequence. This makes it an excellent complement to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You don’t need to look too far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

Our Ghost immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being stolen in the event of being targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered alongside your original key fob in order to prevent the engine from beginning. The unique override PIN is on the black card that you will receive following installation. It’s easy to remember since there are no LED indicators.

The device is hidden in the vehicle’s wires, and does not emit radio signals, which means it cannot be identified by modern criminals with diagnostic software that can identify the security system you have installed. This makes it a great alternative to a tracking device.

Unlike most other security systems that have a relay inside the engine bay, these CANBUS Immobilisers connect with the car’s ECU and BCM via the CAN data bus (brand dependent). This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems but this must be specified prior to installing the device. They also work with valet and service modes, and are a great alternative to a tracking device if you take your car into the dealer to address an electrical problem.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. With easy access how to become a autowatch ghost installer key cloning equipment & door lock pick sets, it is now easier than ever for thieves to take your joy and pride. We’ve developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been copied.

It connects directly to your car’s ECU (Engine Control Unit) via the CAN data circuit. It’s completely silent as it doesn’t use radio frequency or keys fobs. It isn’t detected by diagnostics or any other hacking device. It also prevents you from introducing a new ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can begin your car, you must enter a unique, changeable PIN code up to 20 digits.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being moved away or even started without a PIN code being entered first. If the device is armed and you try to drive off it will display an indication on your dash which will flash regularly for around 300m. If you enter your PIN code during this time, it will deactivate the anti-hijack and your car will continue to operate just as normal. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN every time you try to start your car.