Ghost Immobiliser 2

Protects your vehicle from key cloning & stopping thieves driving it with the original keys. Our most recent immobiliser connects to your vehicle’s CAN data network and a unique PIN must be entered to start the engine.

Contrary to trackers Ghost does not transmit radio frequency signals and can’t be detected by diagnostic tools. It does not have any LED indicators or buttons that would signal its presence in your van or car.

Anti-key cloning

The ghost immobiliser was designed to combat key hacking and cloning. This device is connected to your vehicle’s CAN data network and creates a unique pin code using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your vehicle. If the incorrect PIN is entered it will prevent your engine from starting, making it impossible to leave with joy and pride.

A ghost immobiliser uses an innovative technology that is extremely difficult for thieves to defeat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or taken, the ghost immobiliser is a discreet electronic device that cannot be detected by common thieves, as it doesn’t emit any radio signals and is completely silent.

The next generation of immobilisers are capable of protecting your vehicle from a variety of threats including keys that are duplicated, key-hacking, and relay attacks. It also stops thieves from stealing keys or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 doesn’t require any additional key fobs or remotes for operation. It is able to be deactivated by the driver’s smartphone with a simple application. This is perfect for the time you have to give your car away for valet parking or servicing without the key fobs.

The autowatch ghost immobiliser installation Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to be as easy and convenient to use as is possible, yet remains as secure as ever. This is done by linking the Ghost-II into the vehicle’s data network CAN, which means that there aren’t any additional wires to hide or easily found. It has a built-in feature which allows you to deactivate the Ghost-II simply by connecting to your vehicle’s Bluetooth.

OBD port hacking

OBD port hacking is the latest technique used by professional car thieves. Thieves can access your vehicle’s OBD port with nothing more than an laptop, an app, and a few cables which can be purchased on the internet for less than PS50. Once they have access to your vehicle’s OBD port, they are able to do whatever they like including resetting fault codes and tuning your car to taking your joy and pride away in under a minute.

If you have a ghost installations reviews immobiliser installed, it will stop your car being stolen using this method, by making sure that an unique PIN code sequence is entered alongside your key fob in order to start the engine and then drive away. It communicates with the vehicle’s ECU (Engine Control Unit) via the CAN Data Circuit. This is completely undetectable by any scanners for RF or code grabbing. It also includes a Service/Valet mode that will allow your vehicle to start without the need for a PIN code.

You will also need a cable with OBD pins that connect to the CAN bus. These cables can be found on eBay and Amazon for around P50. You’ll also require a cable that has OBD pins connected to CAN Bus. These cables can be bought on eBay or Amazon for PS50. The cable needs to be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they will send diagnostics to the system using high baud rate that will cause a crash of the car’s CAN and stop the systems from working. This can cause your car’s engine to stall or even lock up.

There is no need for additional remotes or key fobs

A car immobiliser is excellent piece of anti-theft technology used by millions of modern vehicles around the globe. Using engine ECU software to prevent vehicles from starting if a false transponder signal is sent to it an aftermarket immobiliser is an excellent way to safeguard your vehicle.

It is possible for a thief to have the code to disable an immobiliser, to disable it. A thief could easily remove the battery from most key fobs by removing them. They can then use a simple tool in order to take out the internal circuit board from an immobiliser and replace it with blank. Then, they will be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn’t require additional keys or remotes. The immobiliser communicates with engine ECU (Engine Control Unit) via a subtle and silent data circuit in CAN that is unnoticeable with diagnostic tools such as the ones employed by high-tech thieves. It also doesn’t make use of a traditional key-fob that has LED indicators, which means it’s not visible at sight.

There will be instances when you need to deactivate Autowatch Ghost 2’s automatic protection for instance, during a valet parking or service job. Ghost CAN immobilisers come with a feature called ‘Service Mode,’ which you can activate with a simple push of a phone button. The car is still operational however the maximum speed is limited to 36 mph.

Contact us today to arrange a demonstration at our workshop. A member of our team will run through the entire process of the process and provide you with your owner’s manuals, installation certificates, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

Ghost is a new generation device that protects your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle’s CAN data network and a unique PIN code is programmed in it using buttons on your steering wheel and the dash. The system stops engine start and can’t be bypassed because no RF signals are generated from the device. This makes it impossible to detect by sophisticated RF scanning and code grabbing technologies used by modern thieves.

The PIN code can be altered to block earlier drivers or include an override code if you forget the sequence. When installing ghost immobiliser, the installer will demonstrate how to do this. The system includes a valet mode feature that allows you to temporarily disable pin input sequences so that your garage or mechanic can service the vehicle without having to know the pin number. This is great for customers who wish to surrender their vehicle for valet parking or service, but don’t want to divulge the PIN sequence.

Ghost is an individual system that utilizes the buttons on your vehicle to create an individual and interchangeable PIN sequence. The sequence is entered via the smartphone app, meaning there are no additional LEDs being thrown, and your vehicle is protected with no risk of being disabled by hackers or any other technology.

Every vehicle is tested

In contrast to key fobs that require you to press buttons on them, a ghost immobiliser is discreetly installed under your steering wheel or dash so that you don’t even know it’s even there. The device is connected to your vehicle’s CAN network and a PIN code can be programmed by using the buttons on your vehicle. The system stops your engine from running until the code has been entered first. This means that thieves cannot duplicate the keys on your car or gain access to the OBD port to gain access to your vehicle.

Range rover vogue ghost installer can be fitted in all vehicles including electric cars, vans motorhomes and bikes. It is also extremely versatile and can be programmed to turn off in a variety of situations. It can be programmed to enter Valet mode, for instance, when the vehicle is taken to a valet service or parking company. This means that your car can be operated within a specified 30mph speed limit and the ghost immobiliser will activate itself when it returns to your possession.

The device can be reset at any time using your personal PIN code. This is great if you lose the code, or when the device ceases to function.

The device is undetectable by anyone who doesn’t even know what it is. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data they send in order to identify which button was hit. This makes it a safe and reliable security system that cannot be manipulated through RF scanning or jamming, or door lock pick set.