How to Replace a UPVC Window Handle

If the window handle of your upvc is damaged, don’t panic. Replacing a upvc window handle is a relatively simple task and can be completed in just a few steps.

Whether you have a cranked or inline espagnolette type of window handle, all of them have a square spindle bar that extends from the back plate and is slotted into the locking mechanism.

Determine the type and size of the lock and handle

Over time, window handles and locks could be damaged or lose their functionality. It is possible to repair this issue without replacing the entire uPVC unit. One of the first things you need to do is identify the type of handle and lock you have, as this will determine the replacement window, moved here, parts you will need.

Identifying the type of handle can be done by looking at the handle’s base. There is a screw or pin holding the handle to its base. If the screw is missing, it could be an indication that the handle is separated from the base. If the handle is split internally and doesn’t hold onto the spindle anymore it could be an indication that the handle needs to be replaced.

There are many different types of uPVC window replacement handles however the most popular is the Espag handle. They are usually secured with two bolts and have an articulating spindle that is connected to the lock mechanism within the frame of the window. These handles are used on uPVC tilt and turn windows.

Cockspur handles are a different kind of uPVC handle. They’re similar to Espag handles, but they have smaller projections from the frame. These handles are typically used on older uPVC window frames.

Venetian window handles are another option. They are similar to Espag handles but have a flat bottom that allows them to be positioned in a flush position with the frame. These handles are a great option for homeowners who are looking for an elegant handle that will blend with their uPVC frames. These handles come in a variety of colours that can be matched to any style.

Find the spindle’s measurement.

Before you purchase a new handle, it’s important to understand how the original handle is attached. This will tell you whether it’s too tight or loose and if it will fit inside the window frame. It is done by identifying the type of handle you have and measuring the length of the spindle. The spindle is a metal shaft that connects the handle to the lock inside the window frame. It’s available in a variety of sizes, with the current industry standard being 8mm. Older handles could have a cross-section of 9mm, therefore it’s essential to determine the cross-section of the old one to ensure you get the right size replacement.

There are several types of window handles. However, the most common are inline Espagnolette and the cockspur handle. These handles are used to operate a locking system inside the window. They employ shootbolt rods that secure the window when it is closed. They are secured by pins or screws depending on the type of handle you’ve got.

You can find replacement upvc window handles on the internet and in many DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. They can also be key-locking or fire-escape non-locking to provide additional security.

To remove your old handle simply open the window and remove the screws which hold it in place. Store the screws in a container to prevent damage. After the screws have been removed, carefully remove the handle and measure from the base to the tip of the spindle. This will give you the information necessary to purchase the right replacement. The handle’s spindle is the metal shaft that connects it to the lock gearbox inside the window frame.

Remove the old handle

Changing a uPVC window handle is a straightforward job that usually will take no more than five minutes with the right tools. The first step is to determine the lock type and handle that will allow you to identify the right replacement. After that, measuring the spindle will ensure that the new handle is a good for the job. In the end, you’ll need take the handle off and replace it with the new one.

The majority of uPVC handles have inline Espagnolette handles. They have central spindles that slot into the locking mechanism on the window. They are generally simple to remove, but they could require force if they become stuck. The handle is typically secured by two screws, which you can remove using a screwdriver. There may be a need to remove pins, depending on the kind of handle.

After you have removed the screws, you can remove the old handle. If the handle is unlocked and the top of the baseplate will be visible. It will reveal two more screws that can be removed. If the sticker is still in place, you’ll need to take it off.

With the screws that came off the handle, you can now screw the new handle into the appropriate position. Align the screw holes on the window with the holes in the handle. Once you’ve done this you can put on the caps on the screws and then test the new handle to confirm that it functions properly. It’s easy to change a uPVC, but you need to do it right.

Fit the new handle

If you’ve managed to remove the handle that you have on the frame, now is the time to fit the new handle. Begin by finding the screw covers and then lifting them out using your screwdriver. Once they are removed, put them in a secure place and proceed to the next step.

Then screw the spindle into by aligning it with the hole that is already in place. Align the holes on the handle to the holes in the window frame. Use screws of the same size as the previous.

The Espag handle made of uPVC is equipped with a spindle that is 7mm square that rotates the lock mechanism on the window. This type of handle can be present in the majority of modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) have an extended nose that locks over the frame’s outer or transom bar cross member. They are typically found in older windows made of uPVC.

After the new handle is installed, it’s crucial to ensure that it operates correctly by locking and unlocking the window a few times. If everything is in order, your replacement uPVC window handle should now be properly attached and running smoothly. If you are experiencing any issues, these steps will help you determine the cause and fix it swiftly. Bridgewater glass for window replacement can help you when you’re experiencing issues with your uPVC handles or other home improvement that is glazed. Our glaziers have been trained to repair or replace windows with a variety of handles and frames, making us an excellent choice for your double glazing window replacement-glazing requirements.

Test the new handle

Over time, the handles of uPVC can become damaged and worn out. It can make them less secure and less effective, so it is important to replace them immediately. It’s also a good thing to do when upgrading your windows. Change the handle and locking mechanism will help maintain the integrity of your new windows.

There are a variety of styles of uPVC window handles. Some are secured to the frame with pins or screws, while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, therefore it is important to know which kind you’ve got before you begin working on it.

Espag window handles are the most popular kind, and are typically found on the latest uPVC windows. The spindle extends from the handle into the lock gearbox and activates the locking mechanism when you open the window. They’re also simple to remove however you should take care not to damage the mechanism or the handle while taking them off.

Cockspur handles are another alternative for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the wedge-shaped striker plates on the frame. This kind of handle is more difficult to fix than other kinds however, it’s still an excellent choice for the majority of homes.

Venetian window handles are held by two bolts and feature an elongated projection from the frame, unlike the Espag handle. These handles are ideal when you want to have a flush handle which blends in with uPVC window frames. These are a great option for commercial and residential buildings.