Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don’t rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is important to take the time to ensure that you’re doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance you’ll need to source some plastic spacers that will assist the new pane to fit correctly into the frame of the window repairs near me.

If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It’s a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you’ll need open the window repairs near me so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you’ve moved your hinges. If you’re satisfied with the size of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It’s fairly simple to fix a loose uPVC hand. First, you’ll need to shut the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn’t then you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you’re waking up to wet floors and mouldy walls each time it rains it’s crucial to take action. Windows that leak water do not only lead to the destruction of your home’s structure but also hinder your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to ‘over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely the issue is more related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with an ease. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do with someone else to assist in holding the frame up.

Check that the uPVC hinges are closed and open in the correct direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. If they’re beyond repair, it may be required to realign them. The interlock, which is located on the hinge side of the Window Repair and can also become misaligned, again it’s possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than fix them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.